-
This bulk coax cable features a high-grade solid 18 AWG copper conductor and is fully sweep tested to 3GHz. For maximim shield retension, this cable has an aluminum foil shield bonded to the dielectric plus 60% aluminum braid shield. The jacket is lead-free, flame retardent PVC with an UV inhibitor to resist sun damage.Part No. 10X4-2022TH
-
Outdoor runs of RG6 require cable that is specifically designed for that environment. Our direct burial/outdoor rated RG6 cable is UV rated for protection from direct sunlight. Using a cable that is not UV rated would cause the cable to deteriorate over time, and cause the signal to fail eventually. This cable can also be used for direct burial scenarios as well. Just dig a trench, and lay this cable in with the peace of mind that you will receive a reliable signal.Part No. 10X4-622NH
-
This 3 foot black BNC Male to RCA Male Video Cable is an affordable coaxial cable that can be used to run a composite video signal between two compatible components. Perfect for displays that require a single BNC connection from a PAL / NTSC video sources, like a sequencer or CCTV video monitor. It features 75ohm RG59U Coax with 95% braid.Part No. 11X1-02103
-
This 6 foot black BNC Male to RCA Male Video Cable is an affordable coaxial cable that can be used to run a composite video signal between two compatible components. Perfect for displays that require a single BNC connection from a PAL / NTSC video sources, like a sequencer or CCTV video monitor. It features 75ohm RG59U Coax with 95% braid.Part No. 11X1-02106
-
This 12 foot black BNC Male to RCA Male Video Cable is an affordable coaxial cable that can be used to run a composite video signal between two compatible components. Perfect for displays that require a single BNC connection from a PAL / NTSC video sources, like a sequencer or CCTV video monitor. It features 75ohm RG59U Coax with 95% braid.Part No. 11X1-02112
-
This 25 foot black BNC Male to RCA Male Video Cable is an affordable coaxial cable that can be used to run a composite video signal between two compatible components. Perfect for displays that require a single BNC connection from a PAL / NTSC video sources, like a sequencer or CCTV video monitor. It features 75ohm RG59U Coax with 95% braid.Part No. 11X1-02125
-
This Quad Shielded White RG6 cable comes in an easy to use and store 1000 foot pullbox. The cable is constructed of the following: outer jacket made from low smoke PVC, aluminum outer braid (40% coverage), aluminum mylar foil (25% overlap), inner aluminum braid (60% coverage), aluminum mylar foil (25% overlap), foam FEP (fluorinated ethylene propylene) dielectric and an 18AWG solid copper center conductor.Part No. 11X4-191TH
-
This cable is constructed of two Cat6 cables (Blue and Grey) and two RG6 cables (Black and White) bundled inside of an outer jacket (CM Rated) and a maximum operating temperature of 75C. Each Cat6 cable is constructed with 4 solid copper 23AWG twisted pairs and a center spline. Jacket is CM Rated. Each RG6 coaxial cable is quad shielded 3.0 GHz: outer aluminum braid (40% coverage), outer double foil of aluminum, inner aluminum braid (60% coverage) and one more aluminum foil layer. The center conductor is CCS (copper clad steel)Part No. 14X4-161NF
-
This Compression Tool works with all standard compression F, BNC, & RCA connectors. The rotating connector positioner-head allows you to quickly change from smaller RG58, RG59, and RG6 coax cables to larger RG7 and RG11 coax. This all-in-one compression tool is easy to use and will provide quick and reliable results every time.Part No. 30DR-80850
-
This high-frequency coaxial splitter is designed for residential and commercial applications. The diode protected circuitry allows the DC power to pass from any output port to the input port and prevents DC back feeding. This coaxial splitter has one input and 2 outputs. Features
- 15 - 2150 MHz Wideband Operation
- High Return Loss
- Flat Frequency Response
- Flat End F Ports with 1 inch Spacing
- Solder Back Case (-130 dB RFI Shielding
- DISH Network Approved
Part No. 30X3-10002 -
This high-frequency coaxial splitter is designed for residential and commercial applications. The diode protected circuitry allows the DC power to pass from any output port to the input port and prevents DC back feeding. This coaxial splitter has one input and 3 outputs. Features
- 15 - 2150 MHz Wideband Operation
- High Return Loss
- Flat Frequency Response
- Flat End F Ports with 1 inch Spacing
- Solder Back Case (-130 dB RFI Shielding
- DISH Network Approved
Part No. 30X3-10003 -
This high-frequency coaxial splitter is designed for residential and commercial applications. The diode protected circuitry allows the DC power to pass from any output port to the input port and prevents DC back feeding. This coaxial splitter has one input and 2 outputs. Features
- 15 - 2150 MHz Wideband Operation
- High Return Loss
- Flat Frequency Response
- Flat End F Ports with 1 inch Spacing
- Solder Back Case (-130 dB RFI Shielding
- DISH Network Approved
Part No. 30X3-10004 -
RG59 BNC Compression Connector Yellow Band 25pcs-bag<-p>.
These Yellow Band RG59 BNC Compression Connectors are designed fare designed to easily terminate your coax cables while creating a seamless, air-tight connection for your video surveillance or security system. Compression connectors are perfect for use with outdoor cables or when a cable is placed in an area where it may be exposed to moisture. This part comes with twenty five pieces per bag.<-p>
Part No. 31X3-31125 -
RG59 F-Pin Compression Connector Yellow Band 25pcs-bag<-p>.
These Yellow Band RG59 F-Pin Compression Connectors are designed for easy termination and will fit a variety of different size cables. These connectors are perfect for use with outdoor cables or when a cable is placed in an area where it may be exposed to moisture. This part comes with twenty five pieces per bag.<-p>
Part No. 31X3-31325 -
RG6 BNC Compression Connector Purple Band 25pcs-bag<-p>.
These Purple Band RG6 BNC Compression Connectors are perfect for use with outdoor cables or when a cable is placed in an area where it may be exposed to moisture. Compression connectors are designed to easily terminate your coax cables while creating a seamless, air-tight connection for your coax network. This part comes with twenty five pieces per bag.<-p>
Part No. 31X4-31125