-
Our blue 6 foot USB 3.0 SuperSpeed extension cables offer the next great leap in data transfer speeds for your devices. These particular USB 3.0 cables feature a Type A Male (Computer/Tablet/Laptop/Hub side) to Type A Female (Device side with Type A Male ended cable). This USB SuperSpeed cable enables the extension of an existing device up to a total of 10 feet without a hub/repeater or up to 60 feet (six cables) with hubs/repeaters. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02106E
-
Our black 6 foot USB 3.0 SuperSpeed Type A to Type A Male/Male Cables offer the next great leap in data transfer speeds for your devices that require a male A connection. Some routers and USB hard drives use these type of cables. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02106BK
-
This cable takes advantage of the latest USB standard, USB Type-C Alternate Modes, to bring you a simple video cable for your device, be it the newest Galaxy, Android tablet, MacBook, or PC laptop. If your device has a USB-C port look for the USB trident. Next to the trident will be the DP symbol (the P will be in the D.) With this port, streaming on a big screen is as easy as plugging the USB-C end into your device and the HDMI end into your display. There are no drivers to install, it just works! For those interested in technical details, the cable works because VESA decided to release DisplayPort over USB-C in order to make the newest connector on the universal serial bus even more universal. This standard that they developed keeps all the good of USB SuperSpeed and augments it with DisplayPort A/V which includes 4K HDMI! Please note that not all USB C equipped devices allow video out via a cable like this. Please check the specifications on your device to ensure it is capable. Hint look for the USB trident logo with DisplayPorts D logo next to it. If that does not work you can always check the manual for DisplayPort over USB-C or use the Google, you can try asking in over live chat or by phone but please be prepared to supply the make and model of your device.Part No. 10U2-34006
-
This is an Apple authorized cable that will both sync and charge your apple devices. This 6 foot black cable is MFi certified and is compatible with Apple products that use a Lightning port. The color is black. Compatible with: iPhone: 5, 5C, 5S, SE, 6, 6+, 6S, 6S+, 7, 7+ iPod Nano 7G, Touch 5G & 6G iPad w/ Retina, Mini, Mini 2, 3 & 4, Air, Air 2, ProPart No. 10U2-05106BK
-
Our Black 6 foot Micro USB Cable meets the USB 2.0 Hi-Speed specification, it is also backward compatible with 1.0 and 1.1. The type A male end plugs into your computer, laptop or wall charger and the micro typeB male connector plugs into your device. The contacts in the connectors are gold plated to prevent corrosion for the life of the cable. The USB Micro B connection is a very commonly used connection on cell phones, GPS units, PDAs and other mobile devices. The Micro B is favored over the Mini B for its slimmer connection type while still performing at the USB 2.0 specification of 480 Mbps.Part No. 10U2-03106BK
-
This is a black 6 foot male to male USB 2.0 cable with one A-type connection and one B-type. These are more commonly known as USB Printer/Scanner/ Device Cables. Type A is typically the style of connection found on the backs of PCs. Type B is the smaller square connector typically found on devices such as: printers; scanners; external hard drives and USB hubs. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02206BK
-
This 6 foot black USB extension cable will extend a standard USB 2.0 cable with a type-A connector. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02106EBK
-
This 6 foot USB extension cable will extend a standard USB 2.0 cable with a type-A connector. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02106E
-
This is a black 6 foot male to male USB 2.0 cable with A-type male connections on both ends. This is typically the style of connection found on the backs of PCs. This is not the standard configuration for a USB cable. Please make sure the device you are connecting to requires a Type A male cable, the port should be a type A female. USB 2.0 cables are backwards compatible, they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc.Part No. 10U2-02106BK
-
This is a 6 foot male to male USB 2.0 cable with A-type male connections on both ends. This is typically the style of connection found on the backs of PCs. This is not the standard configuration for a USB cable. Please make sure the device you are connecting to requires a Type A male cable, the port should be a type A female. USB 2.0 cables are backwards compatible, they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc.Part No. 10U2-02106
-
This 6 foot Toslink (Toshiba Link) is the standard for fiber optic audio connections. It carries a digital audio signal from CD, DVD, Blu-ray, satellite box, cable box and computers to AV receivers for multi-channel surround sound reproduction. Fiber optic cable can faithfully send data without fear of traditional interferences that are typical in a copper-based medium. Virtually unaffected by electromagnetic and radio frequency interference, this cable reliable transfers a lossless signal for your entertainment. This connection is also known as: optical audio cable; digital optical; fiber optic audio and S/PDIF.Part No. 10TT-40106
-
This 6ft Male to Male S-Video cable is great for connecting S-Video components together. This cable features gold-plated connectors for minimal signal transfer loss. S-Video is a high quality video connection often used with S-VHS VCRs, DVD players, TVs, Camcorders, Video Cards, and is a step up from basic RCA connections where available.Part No. 10S2-01106G
-
This 6 foot RCA audio and video cable features stereo audio and composite video. The connectors consist of three gold-plated male RCA plugs on each end of the cable and the wiring is composed of copper for reduced resistance. These solidly constructed cables are an economical solution for hooking up VCRs, DVD players and other older home theater electronics that make use of RCA jacks for stereo audio and composite video to TVs.Part No. 10R1-03106G
-
This 6 foot RCA audio and video cable features stereo audio and component video. The connectors consist of three nickle male RCA plugs on each end of the cable and the wiring is composed of copper for reduced resistance. These solidly constructed cables are an economical solution for hooking up VCRs, DVD players and other older home theater electronics that make use of RCA jacks for stereo audio and composite video to TVs.Part No. 10R1-03106
-
Our 6 foot MiniDin8 Apple/Mac serial extension cable features a MiniDin8 male and female ends and 8 conductors. Older Macs used a MiniDin8 connection to hook up serial devices. USB has completely taken over as the connection method for devices. However, there are still some legacy devices and computers out there that utilize this connection. This is our high quality serial cable used for connecting Macs to serial devices.Part No. 10M3-04206
-
Our 6 foot MiniDin8 Apple/Mac serial cable features MiniDin8 male ends and 8 conductors. Older Macs used a MiniDin8 connection to hook up serial devices. USB has completely taken over as the connection method for devices. However, there are still some legacy devices and computers out there that utilize this connection. This is our high quality serial cable used for connecting Macs to serial devices.Part No. 10M3-04106
-
This 6 foot PS/2 (MiniDin6) extension cable is designed to work with keyboards and mice that utilize the MiniDin6 connector. Our cable features PS/2 (MiniDin6) male and female ends and 6 conductors with straight through pinning. Before the USB connection established its dominance connecting devices to a computer, the PS/2 connector was the primary method to secure a mouse or keyboard.Part No. 10M2-01206
-
This 6 foot male PS/2 (MiniDin6) cable is designed to work with keyboards and mice that utilize the MiniDin6 connector. Before the USB connection established its dominance connecting devices to a computer, the PS/2 connector was the primary method to secure a mouse or keyboard. To extend a PS/2 mouse or PS/2 keyboard that have a built in PS/2 cable with this, you would need a PS/2 coupler. This PS/2 cable can also be used to connect a computer to a PS/2 KVM switch if you are controlling multiple computers with a single monitor, keyboard and mouse.Part No. 10M2-01106
-
This 6 foot cable is referred to as a Din 5 (male). It is an older AT keyboard cable. This cable's pinout is straight through which means pin 1 on one end is connected to pin 1 on the other end. It is round and larger than the more recent MiniDin6 connector that replaced it for a time in keyboards and Mice. USB has since replaced the MiniDin6 (PS/2) connector which would then make Din5 a Grandfather. Congrats to Din5!Part No. 10I5-02106
-
Mini DisplayPort to DisplayPort cables meet the DisplayPort 1.2 standard, including but not limited to 8.64 Gigabit throughput. These cables have an aluminum mylar foil, braided shield and are RoHS compliant. DisplayPort is a digital display interface developed by the Video Electronics Standards Association (VESA). The interface is primarily used to connect a video source to a display device such as a computer monitor. Supporting a whopping 8.64 Gbit/s data transmission rate, this next generation audio/video cable is perfect for connecting your computer to your HDTV. DisplayPort v1.2 technology allows for up to 2560x1600 video with 10-bit color, 8-channel 24-bit audio and a 1 Mbit/s bi-directional auxiliary data channel all in one cable. This Mini DisplayPort to DisplayPort cable features heavy-duty PVC construction, sleek, a snag-free over mold and corrosion resistant, gold-plated connectors to help deliver years of entertainment content. DisplayPort is a digital display interface developed by the Video Electronics Standards Association (VESA). The interface is primarily used to connect a video source to a display device such as a computer monitor. Supporting a whopping 10.8 Gbit/s data transmission rate, this next generation audio/video cable is perfect for connecting your computer to your HDTV. DisplayPort v1.2 technology allows for up to 2560x1600 video with 10-bit color, 8-channel 24-bit audio and a 1 Mbit/s bi-directional auxiliary data channel all in one cable. This Mini DisplayPort to DisplayPort cable features heavy-duty PVC construction, sleek, a snag-free over mold and corrosion resistant, gold-plated connectors to help deliver years of entertainment content.Part No. 10H1-62106
-
This 6 foot Displayport to DVI cable will allow you to connect a DVI monitor to a DisplayPort compatible device (PC/Laptop). Perfect for when your display uses DVI yet your computer or laptop only has DisplayPort. Support full HD 1900x1080p This cable is unidirectional from computer Display Port to DVI monitor singlelink This cable does not support audio.Part No. 10H1-61106
-
Our 6 foot black DisplayPort cable supports DisplayPort version 1.2 and features two male locking DisplayPort ends. DisplayPort is a digital display interface developed by the Video Electronics Standards Association (VESA). The interface is primarily used to connect a video source to a display device such as a computer monitor. Supporting a whopping 8.64 Gbit/s data transmission rate, this next generation audio/video cable is perfect for connecting your computer to your HDTV. DisplayPort technology allows for up to 4k video with 10-bit color, 8-channel 24-bit audio and a 1 Mbit/s bi-directional auxiliary data channel all in one cable. This cable features heavy-duty PVC construction, sleek, a snag-free over mold and corrosion resistant, gold-plated connectors to help deliver years of entertainment content.Part No. 10H1-60106
-
This 6 foot black KVM (Keyboard/Video/Mouse) cable is specifically made to connect a VGA KVM switch with PS2 mouse and keyboard to a computer. A KVM switch is used to share a single monitor, mouse and keyboard between 2 computers. This KVM cable consists of one male SVGA (HD15), and two male PS2 (MiniDin6) connections on both ends. The PS2 connectors are color coded green for your mouse and purple for your keyboard.Part No. 10H1-30106BK
-
Our 6 foot black HD15 video cable with a 3.5mm Stereo Audio cable built in, more commonly referred to as a SVGA male to male cable with audio, is typically used to connect a computer to a computer monitor. Our SVGA video cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536. Plus this cable is double shielded to extend your video and audio signals without distortion or signal loss.Part No. 10H1-29106
-
This 6 foot black SVGA extension cable has a HD15 male and a HD15 female end. The cable features ferrite beads, coaxial construction and double shielding. Its primary use is for extending the length of a computer to computer monitor connection for video display. The ferrite beads/cores are small iron oxide alloy cylinders wrapped around the ends of the cable. They are used to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them. The coaxial construction and double shielding work to further suppress noise, delivering you the best picture possible. Our SVGA video extension cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536.Part No. 10H1-20206
-
This 6ft SVGA Cable has two HD15 male ends and features ferrite beads, coaxial construction and double shielding. Its primary use is for connecting a computer to a computer monitor for video display. The ferrite beads/cores are small iron oxide alloy cylinders wrapped around the ends of the cable. They are used to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them. The coaxial construction and double shielding work to further suppress noise, delivering you the best picture possible. Our SVGA video cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536.Part No. 10H1-20106
-
Our 6 foot black Slim HD15 video cable, more commonly referred to as a SVGA male to male cable, is typically used to connect a computer to a computer monitor. This specific cable is a slim version, composed of 32 AWG (American Wire Gauge) coaxial wires, which is easier to route and manage. Ferrite Cores are small magnetic cores wrapped around the ends of the cable. They are used to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them. Slim SVGA Monitor Cables are smaller diameter than normal SVGA cables. Slim SVGA Cables also have a smaller hood and ferrite's to fit where other SVGA Cables will not. Our SVGA video cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536.Part No. 10H1-11106
-
This 6 foot black FireWire 400 (IEEE-1394a) cable features a 6 pin connector on one end and a 4 pin connector on the other end. Our cable features thick cable jacketing with a heavy-duty braided shield for protection from abuse and EMI/RFI. FireWire cables are used to transfer data between FireWire enabled devices such as external hard drives, camcorders, DV recorders, digital cameras, etc to computers, laptops and other FireWire capable devices. When selecting your FireWire cable pay attention to pinning of the devices you are connecting to ensure you choose the correct cable for your application. Our FireWire 400 Cables meet the specifications outlined in the IEEE-1394a standard. This means that one can daisy chain up to 63 supported devices on a single FireWire port provided the devices support daisy chaining. The standard supports the following transfer rates: S400 (400 Mbit/s), S200 (200 Mbit/s) and S100 (100 Mbit/s). Lastly the 4 pin connector does not supply power while the 6 pin connector is able to supply power. If your device requires a 4 pin connector it will not be powered/charged via FireWire it will instead use its own separate power.Part No. 10E3-02106
-
Our 6 foot bidirectional printer cable features DB25 Male connectors on both ends. This is a A to A printer cable with 18 twisted pairs. In order to make use of the bidirectional capability of this cable the printer and printer port must be configured to support bidirectional communication.Part No. 10E2-05106
-
Our 6 foot high quality DB25 Male to Centronics 36 (CN36) Male bidirectional parallel printer cable features molded connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. The cable sports 25 conductors. This cable is ideal for connecting 25 pin bidirectional printer ports on laptops, computers and expansion/interface cards to printers and devices have a 36 pin Centronics bidirectional parallel port. This male to male serial cable is solidly constructed, UL rated and RoHS Compliant. There are 3 basic types of Printer Connectors; Type A, Type B, and Type C. Type A is a DB25. Type B is a CN36. Type C is an HPCN36.Part No. 10E2-01106
-
Our 6 foot high quality null modem serial cable features molded male DB25 and female DB25 connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. This null modem cable is typically used to transfer data from one PC directly to another PC. This male to female 8 conductor serial cable is solidly constructed, ROHS compliant. Pin Outs: 1-1, 2-3, 3-2, 4-5, 5-4, 6+8-20, 7-7, 20-6+8, G-G.Part No. 10D3-08206
-
Our 6 foot high quality RS-232 serial cable features molded connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. The connectors are DB25 male and DB25 female supporting 25 conductors in a 1:1 configuration. This cable is ideal for extending 25 pin serial device cables. This male to male serial cable is solidly constructed, RoHS Compliant.Part No. 10D3-01206
-
Our 6 foot high quality RS-232 serial cable features molded connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. The connectors are DB25 male supporting 25 conductors in a 1:1 configuration. This cable is ideal for connecting 25 pin serial devices to laptops, computers and expansion/interface cards that have a 25 pin serial port. This male to male serial cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10D3-01106
-
This 6 foot DB15 Male to DB15 Female Apple/Mac monitor extensions cable is designed for use only with Mac computers. Featuring molded boots, 15 conductors and shielding, this well constructed Mac specific monitor cable will deliver a clear and crisp signal. The connector is a row of 7 pins and a row of 8 pins and should not be confused with an SVGA/VGA end.Part No. 10D2-01206
-
This 6 foot DB15 Male to DB15 Male Apple/Mac monitor cable is designed for use only with Mac computers. Featuring molded boots, 15 conductors and shielding, this well constructed Mac specific monitor cable will deliver a clear and crisp signal. The connector is a row of 7 pins and a row of 8 pins and should not be confused with an SVGA/VGA end.Part No. 10D2-01106