- Snap in blank VGA bezel
- Quantity: 4 per pack
- Suitable for use with our range of snap in bezels and wall plates
- 2 year warranty
Please scroll down for more information about installation
"-
-
- Supports display resolutions of up to 2048 x 1536
- Monitor detection via DDC2B signals
- Supports cable lengths of up to 50m using LINDY Premium Gold S-VGA cables
- Powered via the VGA ports; no separate power supply required
- Auto scan mode with adjustable scan rate (10, 20 seconds and off) automatically switches between the 2 input ports
- Remote control with 1.4m cable for convenient operation, which can be extended up to 50m using a LINDY PS/2 Extension cable
- Connections: 1 x VGA Female (output); 2 x VGA Male (input)
- Dimensions: 103 x 55 x 23mm (WxDxH)
Part No. 32585 -
- Push button operation directly clones the EDID/DDC data of any connected VGA monitor
- Uses cloned data or, when this is not available, the stored preset screen resolutions
- Continuously emulates EDID/DDC information
- Supports Dual Page DDC
- Can be powered from the video port, via a built-in USB pass through port, or using an optional external power adapter
- Dimensions: 80 x 44 x 22mm (WxDxH)
- 2 Year warranty
" -
- Perfect for using older VGA equipment with a HDMI display
- Converts and combines VGA and analog audio signals into a HDMI signal
- Supports resolutions up to 1080p
- Supports stereo analog audio
- Simple plug and play installation
- Supports 12bit per channel (36 bit total) deep Color
- Supports 225MHz/2.25Gbps per channel (6.75Gbps total) bandwidth
- Multi country power supply included
- 2 year warranty
Please Note: This product is a format converter, from analog to digital, there is no resolution scaling.Part No. 38095 -
- Allows computers with USB and VGA connections to be connected to the CAT-32 IP KVM switch
- Compatible with all major operating systems
- Connects to the switch via CAT5e/6 cable (Solid core for long distances up to 100m)
- Supports distances of up to 100m
-
Control up to four 4 USB equipped computers with only one monitor, USB keyboard and mouse!- Monitor, keyboard, mouse, microphone and speakers are directly connected to the ports of the switch.
- If needed, you can connect a USB hub to the switch, so that other USB devices, such as Pen Drives, USB hard drives, card readers, etc. can be connected and you will have access to the devices with USB 1.1 speed ** when switching between computers.
- Speakers and microphone can be excluded from being switched by using Windows or Mac software
- Switching between the two connected PC`s can be done in several ways:
- via keyboard hotkey: 2 x Scroll Lock key
- via switch button on top of the switch
- via KVM Switch software and the icon on the taskbar (Windows) or dock (Mac)
- via Hotkeys: `Ctrl + Alt + [*]', [*] are the keys 1-4
Part No. 32827 -
- Allows computers with PS/2 and VGA connections to be connected to the MC5, MC5-IP and SC5 KVM switch
- Compatible with all major operating systems
- Connects to the switch via CAT5/5e cable
- Supports distances of up to 50m
Part No. 39351 -
- Allows PCs, Macs and SUN computers with USB and VGA connections to be connected to the MC5, MC5-IP and SC5 KVM switch
- Compatible with all major operating systems
- Connects to the switch via CAT5/5e/6 cable
- Supports distances of up to 50m
Part No. 39352 -
- Allows computers with PS/2 and VGA connections to be connected to the CAT-32 IP KVM switch
- Compatible with all major operating systems
- Connects to the switch via CAT5e/6 cable (Solid core for long distances up to 100m)
- Supports distances of up to 100m
-
The LINDY KVM Switch Pro Audio allows you to switch control between 2 PCs using only a single keyboard, monitor and mouse. This switch features speaker and microphone connections allowing each computer's audio signals to be switched too. Installation is quick and easy - there's no need for any special software and all the required connection cables are included. The KVM Switch Pro Audio is the ideal choice for home or office use.
- 4 Port KVM Switch with audio support
- 1.5m KVM+Audio cables included - for connecting 2 computers
- "Plug & Play" installation - no special software required
- Advanced compatibility - supports all widely used mice
- Compatible with all major operating systems
Part No. 32921 -
- Can be used as a VGA to Composite Converter or VGA to S-Video Converter
- Simple Plug & Play operation - no special software or drivers required
- Ideal for presentations, playing games, viewing downloaded video etc.
- Allows simultaneous display on both monitor and TV screen
- Supports display resolutions of up to 1024 x 768
- Push button controls for Zoom, Pan and Overscan
- Supplied with a dedicated 1.2m pass through VGA cable for connecting your computer and monitor
- PAL support only
- Input: VGA (via supplied pass-through cable)
- Output: VGA (via pass-through cable), S-Video and Composite Video
- Dimensions: 145 x 95 x 35mm (WxDxH)
Part No. 32566 -
- Allows computers with PS/2, VGA and speaker connections to be connected to the MC5, MC5-IP and SC5 KVM switch
- Compatible with all major operating systems
- Connects to the switch via CAT5/5e cable
- Supports distances of up to 50m
Part No. 39353 -
- Allows PCs, Macs and SUN computers with USB, VGA and speaker connections to be connected to the MC5, MC5-IP and SC5 KVM switch
- Compatible with all major operating systems
- Connects to the switch via CAT5/5e cable
- Supports distances of up to 50m
Part No. 39354 -
For use with our 8 port CAT5 VGA Splitter & Extender, No. 32538This device receives VGA video signals over CAT5 twisted pair network cable, up to a maximum distance of 300m. Its compact design and easy installation make it ideal for universal use for VGA video distribution.- Receives VGA video over CAT5 cable
- Very easy to install - simply connect the cables
- Adjustable gain and equilisation
- Power supply included
- Supports transmission distances of up to 300m
For use with our Cat.5 VGA Extender and Splitter unit which is sold separately. Use our CAT5e cable (sold separately) to connect the units.Part No. 32539 -
- Can be used with PCs, Macs, DVD players, PVR HDD recorders, set top box, games consoles etc
- Automatically detects the mode and resolution of the PC/HDTV input signal
- On-screen display menu system for output resolution and refresh rate selection
- 48MB frame buffer for frame rate conversion
- 2 year warranty
Part No. 32563 -
- Provides a convenient and secure method of remotely locating workstations or servers without compromising convenience and control
- Distances of up to 300m supported between local and remote units
- Dual console operation - control your computer / KVM Switch from both local and remote locations
- High-resolution video support: 800 x 600 @ 300m; 1600 x 1200/1680 x 1050 @ 200m
- Easy, user-friendly installation - no special software required
- 2 Year warranty
Part No. 39397 -
This user station sends KVM- and audio signals via Cat 5 RJ45 cables. It is used either on a Cat.5 KVM switch MC5/-IP as a user station or as an independent KVM extender with a matching Cat.5 KVM module. The KVM switches MC5 and MC5-IP allow you to spatially separate admin workstations via Cat. 5 cables. This Cat.5 KVM module is already integrated in the KVM switch.Part No. 32357 -
This user station sends KVM- and audio signals via Cat 5 RJ45 cables. It is used either at the Cat.5 KVM switch MC5/-IP as a user station or as a stand-alone KVM extender with matching Cat.5 KVM module. The KVM switches MC5 and MC5-IP allow you to spatially separate admin workstations via Cat.5 cables. This Cat.5 KVM module is already integrated in the KVM switch.Part No. 32358 -
- Provides real time KVM access to remote systems
- Use Local & Remote consoles simultaneously
- Plug & Play installation no additional drivers required, uses standard USB drivers
- Connect two VGA monitors, USB keyboard & mouse as well as stereo speakers to the remote receiver unit
- Use low cost network cables CAT5/5e/6 to connect devices
- Supports VGA signals with resolutions up to 1600 x 1200 or 1920 x 1080
- Supports standard USB keyboards & mice
- Supports analog stereo 3.5mm Jack
- Includes image enhancements for focus and gain
- Robust metal housing
- Dimensions (each unit): 19.3x8.5x2.5cm (WxDxH)
- 2 year LINDY warranty
Part No. 39396 -
- Allows console operation at extended distances of up to 200m using CAT5/5e/6 cable
- Local workstation may be connected using a suitable CAM, please click here
- Connects to your USB keyboard and mouse and VGA monitor
- Supports display resolutions of up to 1600 x 1200 @ 75m, 1024x768 @ 200m
- Power supply included
- Allows your USB keyboard, mouse and monitor to be located up to 200m away from your computer using low cost CAT5/5e cable
- Provides a convenient and secure method of remotely locating workstations and fileservers without compromising control and convenience
- Installs in minutes - no special software required
Important: This product is solely for use with the MC5, MC5-IP ans SC5 KVM Switch range. It is not a standalone KVM Extender solution. The picture above shows front and rear views of a single unit. See our range of KVM Extenders.Part No. 39357 -
- Supports up to 32 USB & VGA and PS/2 & VGA equipped computers
- Supports VGA resolutions up to 1920x1200
- Port switching via hotkey, On-Screen Display or front panel buttons
- PCs are connected via dedicated KVM modules (not included) at distances of up to 100m via Cat5e/6
- 2 year warranty
A KVM switch allows an operator to conveniently control and manage multiple devices, such as PCs and servers, from a single keyboard, mouse and display console.
The Lindy Combo KVM Switch is a hardware solution that allows direct control of multiple computers using a single keyboard, mouse and VGA monitor. It's ideal for system administrators who want to control multiple computers or servers from a single, centralised location.
The switch occupies only a single 1U space in a 19” rack and supports screen resolutions of up to 1920x1200, great for ensuring optimum clarity if used in digital media or graphic design scenarios. It provides 3 simple switching modes, via keyboard hotkeys, front panel buttons and On-Screen Display; setup and management options can be access only via the OSD.
A local console can be connected to the 2 USB and VGA ports on the rear panel while a Daisy Chain VGA port can be used to connect up to 8 Lindy Combo series switches in order to manage to up to 256 multi platform computers with security features, password access and auto log out, perfect for large-scale control systems in transport hubs or surveillance centres. All the functions are accessible from the administrator through a simple to use On-Screen Display.
PCs & connected KVM switches can be remove easily with hot plug support*, allowing for maintenance to take place without the need for powering down all connected devices, essential within "always on" environments such as data centres or traffic management setups.
Computers or servers can be connected to the 32 host ports on the rear panel via Cat5e/6 cables ad distances of up to 100m using USB+VGA (39634) or PS/2+VGA (39633) dedicated KVM modules (not included).
*Hot plug is supported only if the OS of the connected PC supports this function
" -
- 19? rackmount KVM switch which supports up to 24 PC, SUN (USB & 8-pin style), Mac (USB), RS/6000, Alpha and SGI computers at distances of up to 50m using PS/2, USB or SUN Computer Access Modules
- Supports two simultaneous users
- Remote user can be linked via optional CAT5 extenders at up to 300m
- Local user connected via USB and VGA
- On-Screen Display for easy control and configuration
- Enterprise grade security features using AES 128 bit encryption and RSA 2048 bit public key authentication
- High resolution support for both local and remote user up to 1900 x 1440
- 3 year warranty
A complete range of CAM modules and User Stations is available for use with the KVM Switch MC5.Part No. 32367
