Part No. 10X6-722NH
-
Our Bulk 1000 foot solid CMXT Cat5e Ethernet cable comes in a convenient spool and is ideal for the person looking to make longer permanent outdoor/direct burial network runs during installation/expansion of network infrastructure. Typically this cable will find use between buildings. This particular cable is a black CMXT solid cable with foil shielding. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Our Cat5e Ethernet cable exceeds the EIA/TIA-568-C standard. -
Shielded Security/Alarm Wire, Gray, 18/4 (18AWG 4 Conductor), Stranded, CM / Inwall rated, Pullbox, 500 foot -
Fire Alarm / Security Cable, Red, 16/2 (16 AWG 2 Conductor), Solid, FPLR, Pullbox, 1000 foot -
Security/Alarm Wire, Gray, 16/2 (16AWG 2-Conductor), Stranded, CM / Inwall rated, Pullbox, 1000 foot -
Our bulk 1000 foot stranded Cat6 Shielded Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This is a blue stranded cable. The individual conductors are 24AWG (American wire gauge) stranded pure copper for improved flexibility. Pure copper conductors provide the best signal possible. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard.Part No. 10X8-561SH -
Our bulk 1000 foot stranded Cat6 Shielded Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This is a gray shielded stranded cable. The individual conductors are 24AWG (American wire gauge) stranded pure copper for improved flexibility. Pure copper conductors provide the best signal possible. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard.Part No. 10X8-521SH -
This bulk RG6 Siamese coaxial plus power cable consists of 2 cables side by side. The first cable is a standard RG6 coaxial cable with a pure copper center conductor. It is protected from interference by a braided shield with 95% coverage. The second cable is made up of 2 - 18AWG power wires. These are both pure copper, and are insulated separately with red and black jackets. RG6 Siamese cable with 18/2 power is intended for use with surveillance cameras that require BNC video and DC power.Part No. 10X4-18222NH -
This is a orange bulk 1000 foot spool of fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 2 multimode fibers (62.5 micron core) inside an Aramid yarn wrapped in a orange PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. The Graded-Step core and cladding of our orange bulk 62.5/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F2-202NH -
Our bulk 1000ft solid Cat6 shielded Ethernet cable is perfect for in-wall installations or installs in a busy electronic environment. Shielded cables are designed to prevent Electro-Magnetic Interference, ensuring the best signal possible. This is a white, shielded, solid cable. The individual conductors are 23AWG (American wire gauge) solid pure copper for permanent installations. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. Comes on a convenient spool. *Please note, due to the size of the conductors of this cable, it cannot be terminated with regular connectors. This cable is intended to be punched down into keystones or patch panels.Part No. 10X8-591NH -
Our bulk 1000ft solid Cat6 shielded Ethernet cable is perfect for in-wall installations or installs in a busy electronic environment. Shielded cables are designed to prevent Electro-Magnetic Interference, ensuring the best signal possible. This is a yellow, shielded, solid cable. The individual conductors are 23AWG (American wire gauge) solid pure copper for permanent installations. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. Comes on a convenient spool. *Please note, due to the size of the conductors of this cable, it cannot be terminated with regular connectors. This cable is intended to be punched down into keystones or patch panels.Part No. 10X8-581NH -
Our bulk 1000ft solid Cat6 shielded Ethernet cable is perfect for in-wall installations or installs in a busy electronic environment. Shielded cables are designed to prevent Electro-Magnetic Interference, ensuring the best signal possible. This is a red, shielded, solid cable. The individual conductors are 23AWG (American wire gauge) solid pure copper for permanent installations. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. Comes on a convenient spool. *Please note, due to the size of the conductors of this cable, it cannot be terminated with regular connectors. This cable is intended to be punched down into keystones or patch panels.Part No. 10X8-571NH -
Our bulk 1000ft solid Cat6 shielded Ethernet cable is perfect for in-wall installations or installs in a busy electronic environment. Shielded cables are designed to prevent Electro-Magnetic Interference, ensuring the best signal possible. This is a green, shielded, solid cable. The individual conductors are 23AWG (American wire gauge) solid pure copper for permanent installations. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. Comes on a convenient spool. *Please note, due to the size of the conductors of this cable, it cannot be terminated with regular connectors. This cable is intended to be punched down into keystones or patch panels.Part No. 10X8-551NH -
Our bulk 1000ft solid Cat6 shielded Ethernet cable is perfect for in-wall installations or installs in a busy electronic environment. Shielded cables are designed to prevent Electro-Magnetic Interference, ensuring the best signal possible. This is a black, shielded, solid cable. The individual conductors are 23AWG (American wire gauge) solid pure copper for permanent installations. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. Comes on a convenient spool. *Please note, due to the size of the conductors of this cable, it cannot be terminated with regular connectors. This cable is intended to be punched down into keystones or patch panels.Part No. 10X8-522NH -
This is a black bulk 1000 foot spool of indoor/outdoor rated fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 2 multimode fibers (62.5 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our black bulk 62.5/125 indoor/outdoor fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F3-202NH -
A shielded CAT-5E cable will retain a high quality signal when passing near or parallel to high voltage or power cables. CAT-5E cables are primarily used for networking, data transfer, and phone lines. CAT-5E cables can support 10 / 100 / 1000Mbps.Part No. 10X6-551TH -
6 Fiber Indoor/Outdoor Fiber Optic Cable, Multimode, 62.5/125, Black, Riser Rated, Spool, 1000 foot -
Shielded Security/Alarm Wire, Gray, 18/4 (18AWG 4 Conductor), Stranded, CM / Inwall rated, Spool, 500 foot
-
6 Fiber Indoor Distribution Fiber Optic Cable, Multimode, 62.5/125, Orange, Riser Rated, Spool, 1000 foot -
This is an aqua bulk 1000 foot spool of fiber optic distribution cable intended for large installations of short range runs at 10 Gigabit speeds. It is composed of 2 multimode fibers (50 micron core) inside an Aramid yarn wrapped in a aqua PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our aqua bulk 50/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F2-302NH -
Security/Alarm Wire, Gray, 22/6 (22AWG 6 Conductor), Stranded, CM / Inwall rated, Pullbox, 1000 foot -
Shielded Security/Alarm Wire, Gray, 18/2 (18AWG 2 Conductor), Stranded, CMR / Inwall rated, Pullbox, 1000 foot -
Our bulk 1000 foot solid Cat5e shielded Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. This particular cable is a white STP (Shielded Twisted Pair) solid cable. The individual conductors are 24AWG (American wire gauge) solid pure copper for permanent installations. Pure copper conductors provide the best signal possible. Our Cat5e Ethernet cable exceeds the EIA/TIA-568-C standard.Part No. 10X6-591TH -
Our yellow shielded CAT-5E cable will retain a high quality signal when passing near or parallel to high voltage or power cables. CAT-5E cables are primarily used for networking, data transfer, and phone lines. CAT-5E cables can support 10 / 100 / 1000Mbps.Part No. 10X6-581TH -
Our bulk 1000 foot solid Cat5e shielded Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. This particular cable is a black STP (Shielded Twisted Pair) solid cable. The individual conductors are 24AWG (American wire gauge) solid pure copper for permanent installations. Pure copper conductors provide the best signal possible. Our Cat5e Ethernet cable exceeds the EIA/TIA-568-C standard.Part No. 10X6-522TH -
Bulk Shielded Cat5e Red Ethernet Cable, F/UTP (Foil/Unshielded Twisted Pair), Solid, Pullbox, 1000 foot -
Our Bulk 1000 foot solid CMX Cat5e Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make longer permanent outdoor/direct burial network runs during installation/expansion of network infrastructure. Typically this cable will find use between buildings. This particular cable is a black CMX solid cable with water proof tape. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Our Cat5e Ethernet cable exceeds the EIA/TIA-568-C standard.Part No. 10X6-622NH -
Our Bulk 1000 foot solid CMX Cat5e Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make longer permanent outdoor/direct burial network runs during installation/expansion of network infrastructure. Typically this cable will find use between buildings. This particular cable is a black CMX solid cable with a gel filling. This is a very thin oil-like gel that prevents water from entering the individual conductors. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Our Cat5e Ethernet cable exceeds the EIA/TIA-568-C standard.Part No. 10X6-822NH -
RG58 / U Solid, 95% Braided, 1000 ft. This is a bulk reel of 1000 ft, no connectors. This cable is primarily used for connecting up Ethernet Coax systems.Part No. 10X1-022NH -
This is a bulk reel of 1000 foot RG58 coaxial cable. This cable is primarily used for connecting up Ethernet Coax systems. Each center conductor strand is bare copper for maximum conductivity.Part No. 10X1-022MH -
RG11 Quad Shield Coaxial Cable, 14 AWG CCS Solid, Black, Spool, 1000ft -
This black 16 AWG (American Wire Gauge) 4 conductor Speaker cable is rated for outdoor use and/or direct burial. It comes in a 500 foot pull box and is ideal for running to exterior speakers in your backyard or outside the office. Each conductor (wire) is composed of 65 0.16mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G2-722SF -
Our yellow bulk 1000 foot stranded Cat6 Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. Cat6 Cable is used in network applications and have been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a yellow UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard.Part No. 10X8-081SH -
Our red bulk 1000 foot stranded Cat6 Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. Cat6 Cable is used in network applications and have been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a red UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard.Part No. 10X8-071SH -
Our blue bulk 1000 foot stranded Cat6 Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. Cat6 Cable is used in network applications and have been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a blue UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard.Part No. 10X8-061SH -
Our green bulk 1000 foot stranded Cat6 Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. Cat6 Cable is used in network applications and have been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a green UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard.Part No. 10X8-051SH -
This is a black bulk 1000 foot spool of indoor/outdoor rated fiber optic distribution cable intended for long distance runs at high speeds. It is composed of 6 singlemode fibers (9 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Single mode fiber is optimized to work with fiber optic equipment using light wave lengths of 1310nm (nanometers) or 1550nm. The cladding diameter is 125 microns. The core and cladding of our black bulk indoor/outdoor fiber optic cable is constructed using a high quality singlemode fiber that is ITU-T G.652.D compliant and backwards compatible with other legacy singlemode fibers. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F3-006NH -
This is a orange bulk 1000 foot spool of Zipcord fiber optic cable intended for large installations where you are completing the terminations. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. The Graded-Step core and cladding of our orange bulk 62.5/125 fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F1-111NH -
This is a yellow bulk 1000 foot spool of fiber optic distribution cable intended for long distance runs at high speeds. It is composed of 6 singlemode fibers (9 micron core) inside an Aramid yarn wrapped in a yellow PVC outer jacket. Single mode fiber is optimized to work with fiber optic equipment using light wave lengths of 1310nm (nanometers) or 1550nm. The cladding diameter is 125 microns. The core and cladding of our yellow bulk distribution fiber optic cable is constructed using a high quality singlemode fiber that is ITU-T G.652.D compliant and backwards compatible with other legacy singlemode fibers. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F2-006NH -
Security/Alarm Wire, White, 18/2 (18AWG 2 Conductor), Stranded, CMR / Inwall rated, Pullbox, 1000 foot -
Security/Alarm Wire, Gray, 18/2 (18AWG 2 Conductor), Stranded, CMR / Inwall rated, Pullbox, 1000 foot -
2 Fiber Indoor/Outdoor Fiber Optic Cable, Multimode, 62.5/125, Black, Riser Rated, Spool, 1000 foot -
This white 16 AWG (American Wire Gauge) 4 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a 500 foot pull box and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 65 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G2-491SF -
16/2 (16AWG 2C) Solid FPLR Fire Alarm / Security Cable, Red, 500 ft, Pullbox -
18/4 (18AWG 4C) Solid FPLR Fire Alarm / Security Cable, Red, 500 ft, Pullbox -
2 Fiber Indoor Distribution Fiber Optic Cable, Multimode, 50/125, OM3, 10 Gbit, Aqua, Riser Rated, Spool, 1000 foot -
This black 14 AWG (American Wire Gauge) 2 conductor Speaker cable is rated for outdoor use and/or direct burial. It comes in a 500 foot pull box and is ideal for running to exterior speakers in your backyard or outside the office. Each conductor (wire) is composed of 105 0.16mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G3-712SF -
Our blue bulk 1000 foot solid Cat6 Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. Cat6 Cable is used in network applications and have been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a blue UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard.Part No. 10X8-061TH -
Our orange bulk 1000 foot solid Cat6 Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. Cat6 Cable is used in network applications and have been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a orange UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard.Part No. 10X8-031TH
