web analytics
  • DC Power Plug to 19AWG Bare Wire, DC Male to Open Ends, 1 foot
  • This 6 foot cord features a standard US 3-prong plug on one end and bare wires on the other. This converts back and forth between a 3-prong power plug and a bare end. Perfect for special power applications. Color is black.
    Part No. 10W1-10106
  • NEMA 5-15P to Standard ROJ Power Cord, Black, 18/3 (18AWG 3 Conductor) SJT, 10 Amp / 300 Volt, 6 foot
  • This white 16 AWG (American Wire Gauge) 2 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a convenient 50 foot spool and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 65 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.
    Part No. 10G2-29150
  • This white 16 AWG (American Wire Gauge) 2 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a convenient 100 foot spool and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 65 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.
    Part No. 10G2-291HD
  • Security/Alarm Wire, Brown, 22/2 (22AWG 2 Conductor), Solid, CMR / In-wall rated, Coil Pack, 500 foot
  • Security/Alarm Wire, White, 22/2 (22AWG 2 Conductor), Solid, CMR / Inwall rated, Coil Pack, 500 foot
  • 22/2 (22AWG 2C) Solid CM Security Cable, White, 500 ft, Pullbox
  • Security/Alarm Wire, Gray, 22/2 (22AWG 2 Conductor), Stranded, CMR / In-wall rated, Coil Pack, 500 foot
  • Security/Alarm Wire, Brown, 22/2 (22AWG 2 Conductor), Stranded, CMR / In-wall rated, Coil Pack, 500 foot
  • Security/Alarm Wire, White, 22/2 (22AWG 2 Conductor), Stranded, CMR / Inwall rated, Coil Pack, 500 foot
  • 22/2 (22AWG 2C) Stranded Security Cable, White, 500 ft, Pullbox
  • Security/Alarm Wire, White, 22/2 (22AWG 2 Conductor), Solid, CMR / Inwall rated, Pullbox, 1000 foot
  • Security/Alarm Wire, Yellow, 22/4 (22AWG 4 Conductor), Solid, CMR / Inwall rated, Coil Pack, 500 foot
  • 2 Strand Indoor/Outdoor Fiber Optic Cable, OS2 9/125 Singlemode, Black, Riser Rated, Spool, 1000 foot
  • This high-quality coaxial cable can be used with your VCR, TV, Cable Box, Satellite Receivers, etc. Great for older devices that don't have RCA or any of the newer audio/video connections.
    Part No. 10X4-022NH
  • This is our high quality F-Pin coaxial cable typically used with VCRs, TVs, cable boxes, satellite receivers, etc. With the 1000 ft spool you'll need to crimp the RG6 connectors onto it with our Crimping Tool, Part # 91D5-05500.
    Part No. 10X4-022TH
  • Security/Alarm Wire, Gray, 22/4 (22AWG 4 Conductor), Stranded, CMR / Inwall rated, Coil Pack, 500 foot
  • Security/Alarm Wire, White, 22/4 (22AWG 4 Conductor), Solid, CMR / Inwall rated, Pullbox, 500 foot
  • Security/Alarm Wire, White, 22/2 (22AWG 2 Conductor), Stranded, CMR / Inwall rated, Pullbox, 1000 foot
  • Security/Alarm Wire, White, 22/4 (22AWG 4 Conductor), Stranded, CMR / Inwall rated, Pullbox, 500 foot
  • This Black Quad Shielded RG6 Coaxial Cable is designed for use in environments with higher levels of interference. It is ideal for transmitting video signals for Cable TV, Satellite TV, CCTV, Security/Surveillance cameras and more. It features a RG6 Coaxial Cable constructed with an outer aluminum and magnesium braid layer (40% coverage), an aluminum foil layer, an inner braid constructed similarly as the outer but featuring 95% coverage and one more aluminum foil layer.
    Part No. 10X4-122NH
  • Our RG6 cables provide excellent audio and video quality in both daylight and darkness. They are incredibly flexible which makes them very easy to install and provide high quality images.
    Part No. 10X4-122TH
  • Our bulk 500 foot solid Cat5e Ethernet cable comes in an easy to use pull-box and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. This particular cable is a blue UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Our Cat5e Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X6-061TF
  • This white bulk 500 foot solid Cat5e Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. This particular cable is a white UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Our Cat5e Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X6-091TF
  • Security/Alarm Wire, Gray, 22/2 (22AWG 2 Conductor), Stranded, CMR / In-wall rated, Pullbox, 1000 foot
  • Bulk Zipcord Fiber Optic Cable, Singlemode, Duplex, 9/125, Yellow, Riser Rated, Spool, 1000 foot
  • This is a yellow bulk 1000 foot spool of Zipcord fiber optic cable intended for large installations where you are completing the terminations. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. Single mode fiber is optimized to work with fiber optic equipment using light wave lengths of 1310nm (nanometers) or 1550nm. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. The core and cladding of our yellow bulk 9/125 fiber optic cable is constructed using a high quality singlemode fiber that is ITU-T G.652.D compliant and backwards compatible with other legacy singlemode fibers. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.
    Part No. 10F1-001NH
  • Our gray bulk 500 foot solid Cat6 Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. Cat6 Cable is used in network applications and have been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a gray UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X8-021TF
  • Fire Alarm / Security Cable, Red, 18/2 (18 AWG 2 Conductor), Solid, FPLR, Spool, 500 foot
  • This is a black bulk 1000 foot spool of indoor/outdoor rated fiber optic distribution cable intended for long distance runs at high speeds. It is composed of 2 singlemode fibers (9 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Single mode fiber is optimized to work with fiber optic equipment using light wave lengths of 1310nm (nanometers) or 1550nm. The cladding diameter is 125 microns. The core and cladding of our black bulk indoor/outdoor fiber optic cable is constructed using a high quality singlemode fiber that is ITU-T G.652.D compliant and backwards compatible with other legacy singlemode fibers. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.
    Part No. 10F3-002NH
  • Outdoor runs of RG6 require cable that is specifically designed for that environment. Our direct burial/outdoor rated RG6 cable is UV rated for protection from direct sunlight. Using a cable that is not UV rated would cause the cable to deteriorate over time, and cause the signal to fail eventually. This cable can also be used for direct burial scenarios as well. Just dig a trench, and lay this cable in with the peace of mind that you will receive a reliable signal.
    Part No. 10X4-622NH
  • Fire Alarm / Security Cable, Red, 18/2 (18 AWG 2 Conductor), Solid, FPLR, Pullbox, 500 foot
  • Shielded Security/Alarm Wire, Gray, 22/4 (22AWG 4 Conductor), Stranded, CMR / Inwall rated, Pullbox, 500 foot
  • Outdoor/Direct Burial Speaker Cable, Black, Pure Copper, CMR/CL3R, 16/2 (16 AWG 2 Conductor), 65 Strand / 0.16mm, Pullbox, 500 foot
    Part No. 10G2-712SF
  • This bulk coax cable features a high-grade solid 18 AWG copper conductor and is fully sweep tested to 3GHz. For maximim shield retension, this cable has an aluminum foil shield bonded to the dielectric plus 60% aluminum braid shield. The jacket is lead-free, flame retardent PVC with an UV inhibitor to resist sun damage.
    Part No. 10X4-2022TH
  • Bulk RG6U Coaxial Cable, White, 18 AWG Pure Copper Solid Core, 3 GHz, Pullbox, 1000 foot
    Part No. 10X4-2091TH
  • Security/Alarm Wire, White, 18/2 (18AWG 2 Conductor), Stranded, CMR / Inwall rated, Pullbox, 500 foot
  • Quad Shield Direct Burial/Outdoor rated Bulk RG6U Coaxial Cable, Black, 18 AWG, 3 GHz, Spool, 1000 foot
  • This white 16 AWG (American Wire Gauge) 2 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a 500 foot pull box and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 65 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.
    Part No. 10G2-291SF
  • This 1000 foot Black BNC RG59/U 75 Ohm coaxial cable comes in easy to use pull boxes. Its primary use is for custom video runs for CCTV, Surveillance and Security video systems. The cable features a 20 AWG solid copper core.
    Part No. 10X3-022TH-20
  • This BNC cable is primarily used for connecting up video systems that use BNC connectors. This is a bulk spool, containing no connectors.
    Part No. 10X3-091TH-20
  • Security/Alarm Wire, Gray, 22/6 (22AWG 6 Conductor), Stranded, CM / Inwall rated, Pullbox, 500 foot
  • RG6U 18AWG Quad Shield, Pure Copper 3 GHz Coaxial Cable, Black, 1000 ft, Pullbox
    Part No. 10X4-2122TH
  • RG6U 18AWG Quad Shield, Pure Copper 3 GHz Coaxial Cable, White, 1000 ft, Pullbox
    Part No. 10X4-2191TH
  • Bulk Zipcord Fiber Optic Cable, Multimode, Duplex, 50/125, OM3, Aqua, Riser Rated, Spool, 1000 foot
  • 6 Strand Indoor/Outdoor Fiber Optic Cable, OS2 9/125 Singlemode, Black, Riser Rated, Spool, 1000 foot
  • Our gray bulk 1000 foot solid Cat5e Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. This particular cable is a gray UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Our Cat5e Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X6-021TH
  • Our black bulk 1000 foot solid Cat5e Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. This particular cable is a black UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Our Cat5e Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X6-022TH
  • Our orange bulk 1000 foot solid Cat5e Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. This particular cable is a orange UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Our Cat5e Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X6-031TH
  • Our purple bulk 1000 foot solid Cat5e Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. This particular cable is a purple UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Our Cat5e Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X6-041TH
  • Our bulk 1000 foot solid Cat5e Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. This particular cable is a green UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Our Cat5e Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X6-051TH
  • Our bulk 1000 foot solid Cat5e Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. This particular cable is a blue UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Our Cat5e Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X6-061TH
  • Our bulk 1000 foot solid Cat5e Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. This particular cable is a red UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Our Cat5e Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X6-071TH
  • Our bulk 1000 foot solid Cat5e Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. This particular cable is a yellow UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Our Cat5e Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X6-081TH
  • This white bulk 1000 foot solid Cat5e Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. This particular cable is a white UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Our Cat5e Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X6-091TH
  • Fire Alarm / Security Cable, Red, 22/4 (22 AWG 4 Conductor), Solid, FPLR, Pullbox, 1000 foot
  • Our gray bulk 1000 foot stranded Cat5e Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. This particular cable is a gray UTP (Unshielded Twisted Pair) stranded cable. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Pure copper conductors provide the best signal possible. Our Cat5e Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X6-021SH
  • Our black bulk 1000 foot stranded Cat5e Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. This particular cable is a black UTP (Unshielded Twisted Pair) stranded cable. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Pure copper conductors provide the best signal possible. Our Cat5e Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X6-022SH
  • Our purple bulk 1000 foot stranded Cat5e Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. This particular cable is a purple UTP (Unshielded Twisted Pair) stranded cable. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Pure copper conductors provide the best signal possible. Our Cat5e Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X6-041SH
  • Our bulk 1000 foot stranded Cat5e Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. This particular cable is a green UTP (Unshielded Twisted Pair) stranded cable. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Pure copper conductors provide the best signal possible. Our Cat5e Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X6-051SH
  • Our bulk 1000 foot stranded Cat5e Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. This particular cable is a blue UTP (Unshielded Twisted Pair) stranded cable. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Pure copper conductors provide the best signal possible. Our Cat5e Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X6-061SH
  • Our bulk 1000 foot stranded Cat5e Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. This particular cable is a yellow UTP (Unshielded Twisted Pair) stranded cable. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Pure copper conductors provide the best signal possible. Our Cat5e Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X6-081SH
  • Our bulk 1000 foot stranded Cat5e Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. This particular cable is a white UTP (Unshielded Twisted Pair) stranded cable. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Pure copper conductors provide the best signal possible. Our Cat5e Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X6-091SH
  • Our 500 foot White Siamese/CCTV cables come in easy to use pull boxes and provide excellent audio and video quality in both daylight and darkness. They are incredibly flexible which makes them very easy to install and provide high quality images for recording evidence or to help analyze an event. Our cable offers a 95% braid coverage which maintains adequate shielding against all types of interference throughout the run. They also feature a 20 AWG (American Wire Gauge) solid copper center conductor, which can provide a perfect signal up to 400 feet.
    Part No. 10X3-18291TF
  • This is a aqua bulk 1000 foot spool of Zipcord fiber optic cable intended for large installations where you are completing the terminations. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at 10 Gigabit speeds. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. The Graded-Step core and cladding of our aqua bulk 50/125 fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.
    Part No. 10F1-301NH
  • This white 14 AWG (American Wire Gauge) 2 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a 500 foot pull box and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 105 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.
    Part No. 10G3-291SF
  • This 1000 foot RG11 CCTV coaxial cable is perfect for cable and satellite TV connections, Ethernet Coax systems and surveillance/security cameras. Various connectors sold separately. Excellent choice for bigger jobs with long runs.
    Part No. 10X7-422NH
  • Security/Alarm Wire, Gray, 18/4 (18AWG 4 Conductor), Stranded, CMR / Inwall rated, Pullbox, 500 foot
  • Security/Alarm Wire, White, 18/4 (18AWG 4 Conductor), Stranded, CMR / Inwall rated, Pullbox, 500 foot
  • Our gray bulk 1000ft stranded Cat6 Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. Cat6 Cable is used in network applications and have been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a gray UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X8-021SH
  • Our black bulk 1000 foot stranded Cat6 Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. Cat6 Cable is used in network applications and have been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a black UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X8-022SH
  • Our orange bulk 1000 foot stranded Cat6 Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. Cat6 Cable is used in network applications and have been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a orange UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X8-031SH
  • Our white bulk 1000 foot stranded Cat6 Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. Cat6 Cable is used in network applications and have been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a white UTP (Unshielded Twisted Pair) stranded cable. The individual conductors are 24 AWG (American wire gauge) pure copper. Pure copper conductors provide the best signal possible. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X8-091SH
  • 2 Fiber Indoor/Outdoor Fiber Optic Cable, Multimode, 50/125, OM3, 10 Gbit, Black, Riser Rated, Spool, 1000 foot
  • Our bulk 1000 foot stranded Cat5e Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. This particular cable is a red UTP (Unshielded Twisted Pair) stranded cable. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Pure copper conductors provide the best signal possible. Our Cat5e Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X6-071SH
  • Our gray bulk 1000 foot solid Cat6 Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. Cat6 Cable is used in network applications and have been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a gray UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X8-021TH
  • Our black bulk 1000 foot solid Cat6 Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. Cat6 Cable is used in network applications and have been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a black UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X8-022TH
  • Our orange bulk 1000 foot solid Cat6 Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. Cat6 Cable is used in network applications and have been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a orange UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X8-031TH
  • This cable is a purple UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X8-041TH
  • Our blue bulk 1000 foot solid Cat6 Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. Cat6 Cable is used in network applications and have been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a blue UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X8-061TH
  • This black 14 AWG (American Wire Gauge) 2 conductor Speaker cable is rated for outdoor use and/or direct burial. It comes in a 500 foot pull box and is ideal for running to exterior speakers in your backyard or outside the office. Each conductor (wire) is composed of 105 0.16mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.
    Part No. 10G3-712SF
  • 2 Fiber Indoor Distribution Fiber Optic Cable, Multimode, 50/125, OM3, 10 Gbit, Aqua, Riser Rated, Spool, 1000 foot
  • 16/2 (16AWG 2C) Solid FPLR Fire Alarm / Security Cable, Red, 500 ft, Pullbox
  • This white 16 AWG (American Wire Gauge) 4 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a 500 foot pull box and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 65 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.
    Part No. 10G2-491SF
  • 2 Fiber Indoor/Outdoor Fiber Optic Cable, Multimode, 62.5/125, Black, Riser Rated, Spool, 1000 foot
  • Security/Alarm Wire, Gray, 18/2 (18AWG 2 Conductor), Stranded, CMR / Inwall rated, Pullbox, 1000 foot
  • Security/Alarm Wire, White, 18/2 (18AWG 2 Conductor), Stranded, CMR / Inwall rated, Pullbox, 1000 foot
  • This is a yellow bulk 1000 foot spool of fiber optic distribution cable intended for long distance runs at high speeds. It is composed of 6 singlemode fibers (9 micron core) inside an Aramid yarn wrapped in a yellow PVC outer jacket. Single mode fiber is optimized to work with fiber optic equipment using light wave lengths of 1310nm (nanometers) or 1550nm. The cladding diameter is 125 microns. The core and cladding of our yellow bulk distribution fiber optic cable is constructed using a high quality singlemode fiber that is ITU-T G.652.D compliant and backwards compatible with other legacy singlemode fibers. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.
    Part No. 10F2-006NH
  • This is a orange bulk 1000 foot spool of Zipcord fiber optic cable intended for large installations where you are completing the terminations. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. The Graded-Step core and cladding of our orange bulk 62.5/125 fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.
    Part No. 10F1-111NH
  • This is a black bulk 1000 foot spool of indoor/outdoor rated fiber optic distribution cable intended for long distance runs at high speeds. It is composed of 6 singlemode fibers (9 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Single mode fiber is optimized to work with fiber optic equipment using light wave lengths of 1310nm (nanometers) or 1550nm. The cladding diameter is 125 microns. The core and cladding of our black bulk indoor/outdoor fiber optic cable is constructed using a high quality singlemode fiber that is ITU-T G.652.D compliant and backwards compatible with other legacy singlemode fibers. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.
    Part No. 10F3-006NH
  • Our green bulk 1000 foot stranded Cat6 Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. Cat6 Cable is used in network applications and have been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a green UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X8-051SH
  • Our blue bulk 1000 foot stranded Cat6 Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. Cat6 Cable is used in network applications and have been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a blue UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X8-061SH
  • Our red bulk 1000 foot stranded Cat6 Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. Cat6 Cable is used in network applications and have been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a red UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X8-071SH
  • Our yellow bulk 1000 foot stranded Cat6 Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make a variety of patch cables over a larger job or for one looking to be prepared to handle unexpected situations on the network infrastructure. Cat6 Cable is used in network applications and have been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a yellow UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard.
    Part No. 10X8-081SH
  • This black 16 AWG (American Wire Gauge) 4 conductor Speaker cable is rated for outdoor use and/or direct burial. It comes in a 500 foot pull box and is ideal for running to exterior speakers in your backyard or outside the office. Each conductor (wire) is composed of 65 0.16mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.
    Part No. 10G2-722SF
Go to Top