- USB 2.0/OTG Type Micro-B Male to USB 2.0 Type Mini-B Male
- Micro-B is OTG Host connector
- Black cable
- Fully shielded cable with moulded connectors
- 10 year warranty
-
-
- Mouse holder for receiving the computer mouse
- Including a piece of double-sided tape on the mouse holder - e.g. to attach to the monitor, desk or wall
Part No. 40164 -
Use this RJ45 port lock around RJ45 sockets to prevent unwanted connection of connection cables. Also prevents unauthorised access via the network.
The lock secures itself to the RJ45 port and can be removed again with the appropriate key. It locks with the front panel of the RJ45 port inside the housing prevent it from being simply pulled out.
- Expansion kit with 20 port locks
- Keys available under Article No. 40470
Safety information: For safety reasons, please note that these locks can also be removed without the key with skill and an appropriate tool.
Please note: this key is only compatible with the corresponding color of port blocker.
" -
Blocks HDMI CEC signals when there is an incompatibility
Use this adapter when you have problems with incompatibilities between IR remote controls; such problems tend to occur now and then in installations with HDMI splitters and -switches.
The adapter does not pass on the CEC signal further. In principle, you only need to use this adapter upstream of the incompatible devices. However, several adapters installed upstream of a number of devices can be used.
- Short adapter HDMI Type A 19 Pole
- 10 year warranty
" -
- USB 2.0/OTG Type Micro-B Male to USB 2.0 Type Mini-B Male
- Micro-B is OTG Host connector
- Black cable
- Fully shielded cable with moulded connectors
- 10 year warranty
-
This simple device gives system administrators, installers and technicians a physical way of preventing people from interfering with LC Fiber Optic connections. This increases security against unauthorized tampering. The LC Security Block is made up of a simple 'block' that attaches to the LC Fiber Optic connector. The connector and block are then inserted into the required port as normal, until the block clicks into place. To remove, plug the key into the block and remove the block from port.Part No. 40476 -
- Regulated 12V output voltage with several adapters for world-wide connections
- Switching power supply for world-wide employment
- Cable length: approx. 1.4m
- 2 year warranty
- Contains 4 exchangeable power supply plugs for Europe, Great Britain, North America and Asia
- Supports input voltages within the range of 100V to 240V
- Great Britain
- Europe
- Hong Kong
- Singapore
- USA
- Canada
- Taiwan
- Japan
- China
- Australia
- New Zealand
Part No. 73805 -
- USB 2.0/OTG Type Micro-B Male to USB 2.0 Type Mini-B Male
- Micro-B is OTG Host connector
- Black cable
- Fully shielded cable with moulded connectors
- 10 year warranty
-
- Quality, high performance cable from one of the world's leading brands
- Represents excellent value for money
- Triple shielded cable construction for optimum RF and EMI protection
- Solid core construction
- 1080p over HDMI ready
- Supports resolutions up to 1080p,
- ARC and CEC compatible
- Deep Color capable, x.v.Color and xvYCC ready
- 10 year warranty
Click here to compare the main cables from our HDMI range.Part No. 41373 -
This high-quality LINDY USB 2.0 cable is fully-compatible with USB 2.0 specifications and is backwards-compatible with previous standards. It supports all data transfer rates up to 480 MBit/sec.- USB 2.0 cable
- Connector: Micro-A connector to type B connector
- Double-shielded cables with moulded connectors
- Lengths from 0.5m to 3m
Part No. 31950 -
Note: Not for use with Dimage A1, XT, XI, X, X2, F3 & F1IMPORTANT: Camera manufacturers use various different connectors depending on make and model. Before ordering this cable, please ensure that the female connector on your camera corresponds to the male connector end-view as shown in the picture above.Part No. 31679 -
- Enables a computer, which supports dual video output via its DMS output port, to be connected to two separate DVI-I monitors.
- Connectors: DMS 59 Single Link Male to 2 x DVI-I Female
- Length: 160mm
- 10 Year Warranty
Note: Before purchasing this cable, please ensure that your video card can output via a DMS 59 port. You may need to check your system documentation or contact your computer manufacturer for clarification." -
This simple device gives system administrators, installers and technicians a physical way of preventing people from interfering with LC Fiber Optic connections. This increases security against the risk of unauthorized tampering.
The LC Security Block is made up of a simple 'block' that attaches to the LC Fiber Optic connector. The connector and block are then inserted into the required port as normal, until the block clicks into place. To remove, plug the key into the block and remove the block from port.Part No. 40475 -
- This adapter cable can be used with Notebooks, Camcorders and other devices which feature a 4 segment 3.5mm combined video & stereo audio socket
- Connectors: 1 x 4 segment 3.5mm jack to 3 x RCA/Phono female connectors -
- White (Audio, left)
- Red (Audio, right)
- Yellow (Composite Video)
- Cable length: 25cm
- 10 year warranty
-
- Connectors: 6.3mm Stereo Male to 2 x RCA/Phono Female
- 24K gold plated connectors resist tarnishing to ensure long term performance and reliability
- 10 year warranty
Part No. 35512 -
- Socket 478
- For P4 up to 3,2 GHz
- Aluminium Heatsink
- Simple installation via Metal clip
- 12V DC Ball Bearing Fan (80x80x25 mm)
- Noise Level: 32 dB (A)
- Fan Speed: 3000 RPM
- Fan with RPM signal output
- Thermal design power (TDP): 82 Watts
- CE Approved
Part No. 73653 -
- Charge your iPad from your PC
- Compatible with Apple iPads, iPods and iPhones
- PC and Mac compatible
- 2 year warranty
Part No. 73336 -
- Gives you better access to USB 3.0 ports
- Connectors: USB 3.0 Type A Male, USB 3.0 Type A Female
- USB 3.0 SuperSpeed Compliant
- Ideal for situations where space or access is limited such as the rear of PC towers
- Use to redirect ports and connecting cables for a neater installation
- Projects 27mm from ports when connected
- color: Black
- Dimensions (WxDxH) 20 x 40 x 23 mm
- 10 Year Warranty
-
- Connectors: Mini-B Female, Micro-B Male
- USB 2.0 High Speed Compliant
- Supports USB 2.0 and USB 1.1 devices
- Color: Black
- Warranty 10 Years
Part No. 71234 -
- Connectors: Type B Female, Micro-B Male
- USB 2.0 High Speed Compliant
- Supports USB 2.0 and USB 1.1 devices
- Color: Black
- Warranty 10 Years
Part No. 71233 -
- Connectors: Type A Male, Type A Male
- USB 2.0 High Speed Compliant
- Supports USB 2.0 and USB 1.1 devices
- Color: Black
- Warranty 10 Years
-
- Connects two mini optical cables together
- For use with DVD players, CD players, Home Cinema and professional audio devices etc.
Part No. 70415 -
- Connects two TosLink cables together
- For use with DVD players, CD players, Home Cinema and professional audio devices etc.
-
- Converts a mini optical plug to a standard TosLink plug
- Ideal for use with MD players etc.
Part No. 70413 -
- 4 Pin FireWire Male (Camcorder, etc.) to 6 Pin FireWire Female
- IEEE 1394 compliant
- Color: Black
Part No. 70395 -
This 90 degree bracket adapter allows you to connect VGA cables to the rear of your device in parallel in order to save space. It can be screwed onto the VGA socket and is only a few centimetres deep. It is angled (upwards) across the long edge of the VGA connector.- Provides a VGA socket with screw connection.
- Two double nuts are optional. These can be screwed onto the screws on the connector side where needed.
- Gold-coated contacts and housing for optimum signal transfer and exceptional long-term stability
- All pins connected 1:1
- 10 year warranty
Part No. 70318 -
Modular system This adapter comprises:- RJ45 coupling with 8 connected Crimp connectors, Color-coded.
- 9-pin Sub-D connector,
- Contacts are pluggable in any arrangement
Part No. 70246 -
- Configurable wiring
- Any pin to any pin
- 10 year warranty
Part No. 70245 -
- Saves wear and tear on your expensive ports
Part No. 70074 -
- 10 Pack
Part No. 62270 -
- The USB Bluetooth Adapter is a quick, easy and inexpensive solution for customers wanting to add Bluetooth capability to their computer. The USB Bluetooth Adapter allows direct wireless communications between any Bluetooth compatible devices.
Part No. 52206 -
- Bus Type: 32 Bit PCI
- Speed: Up to 920Kbit/sec
- I/O Address: "Plug & Play"
- Supports 3.3V and 5V motherboards
- DC 5V output for DB9 selected by jumper
- Standard and Low Profile back plates included
- IRQ Selection: "Plug & Play"
- External Connector: 1 x 44 Way D Female
- Adapter Cable: 44 Way D Male to 4 x 9 Way D Male
- Software Compatibility: DOS, Windows 98SE/ME/NT/2000/XP/Vista/Windows 7/8/Server 2003, 2008
- Chipset: Oxford semiconductor
- 2 Year Warranty
Part No. 51274 -
- Full CAT5e specification with moulded boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Gigabit Ethernet ready
- 100% performance tested
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Cables feature a unique snag-less latch protector ensuring latches aren‘t easily damaged or broken
- Foil Twisted-Pair (FTP) - the extra foil shielding protects against Electro Magnetic Interference (EMI) and Radio Frequency Interference (RFI)
- 10 year warranty
Part No. 45926 -
- Full CAT6 specification with moulded boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45848 -
- USB 3.0 SuperSpeed up to 5Gbps
- USB 2.0 and 1.1 compatible
- Suitable for 2.5″ and 3.5″ SATA lII HDDs/SSDs* and 5.25″ ODD drives
- Compliant to SATA III Specification
- Plug and Play
- Compatible with Windows XP/Vista/7, Mac OSX 10.8 and Linux
* Please Note: This product does not directly support 3.3V HDD/SSD, to use drives which require 3.3V please use our SATA/Micro SATA AdapterPart No. 43119 -
- Sits inline to measure current and voltage output from any USB port
- Wide voltage and amperage range (up to 24 Volts / 6 Amps)
- 6 Digit LED display for clear and accurate readings
- Compatible with QC 1.0, 2.0 and 3.0
- 2 year warranty
The LINDY USB Power Meter plugs directly into any powered USB port. It allows for easy, convenient monitoring of output voltage and operating current. It quickly tells you if your USB socket is providing power normally and if devices are receiving enough power to operate. A LED display allows you to instantly read the information without affecting the performance of the device.
It is ideal for monitoring the power usage of an external drive or other USB peripherals as well as checking the power demands of your smartphone, tablet etc. It can also be used to check the different power outputs of your computers USB Ports, wall charger, battery pack, or even a USB enabled solar panel. Compatible with Quick Charge technology it can easily read any voltage up to 24 volts or measure any current up to 6 amps.Depending on the orientation of your USB Ports combining the USB Power Meter with one of our Passive Type A Male to Female USB Extension Cables or 90 Degree Male to Female L-Adapters, will allow for easier positioning and viewing of the LCD display.
Please note - USB sockets will only output as much power as is demanded by the device you are charging, the USB Power Meter will show the voltage and amperage being delivered from the USB port. It will not show the maximum possible power output from the USB socket.Part No. 43032 -
This internal 2.5″ SATA hard drive module easily installs into a standard 3.5″ drive bay making it an ideal way to expand your hard disk storage. A neat push button system allows quick removal of the drives. It can be installed into any suitable PC case and is ideal for servers or workstations, allowing instant hot-swap access to the hard drives.The SATA hard drive module features a unique connection mechanism which allows the drives to be mounted directly into the housing without the need for a separate caddy. A special 'no-scratch' connector protects the drive contacts and is tested to exceed over 10,000 insertions and ejections.- Allows two 2.5″ SATA hard drives to be installed into a standard 3.5″ drive bay
- Connects to your PC's internal SATA controller
- Features 'caddy-less' drive ejection system
- Supports 'Hot Swap' function
- High quality aluminium housing for efficient cooling
- LED indicators for power and hard disk drive access
- Supplied with 2 SATA data cables
- External connectors:
- 2 x SATA (data)
- 1 x 5¼" Power (adapters available for SATA power connectors)
- Dimensions: 100 x 123 x 25mm (WxDxH)
- Mounting screws included
- Suitable for use with most 2.5″ SATA hard disks up to 9.5mm in height
Please note: hard drives are not included.A wide range LINDY SATA cables and power adapters are also availablePart No. 42971 -
The USB 2.0 Audio Adapter is designed to take your standard USB 2.0 port and convert it to a headphone jack, speaker jack or mic jack so you can listen to music, play games, watch movies or video chat. It offers Virtual 7.1 surround sound, which is activated with the supplied software (Windows XP, Windows Vista and Windows 7 only). It has two 3.5-millimeter jack sockets that can be used for headphones, speakers and microphones and is equipped with a handy console with volume and mute buttons so you can adjust the sound from the module. Use this USB audio adapter on Mac or Windows.
Part No. 42961 -
More InformationThis card reader supports the following memory cards:Compact Flash (CF), Micro Drive (MD), Smart Media (SM), xD Picture Card (xD), MultiMediaCard (MMC), MMC Plus, Secure Digital (SD), Secure Digital High Capacity (SDHC), High Speed SD, Memory Stick (MS), High Speed MS, MS-Pro, High Speed MS-Pro, Mini SD, MS Duo, MS Pro-Duo, RS-MMC, MMC mobile, T-Flash*, MMC-ROM, MMC Plus ROM, MMC Mobile ROM, MS ROM, MS-Pro ROM, SM ROM* An adapter is required which is not included. Usually supplied with the memory card.Part No. 42939 -
Print from your USB ready PC to a parallel printer! This USB to Parallel adapter allows any Windows compatible PC with USB support to print to any bi-directional printer equipped with a 36 way Centronics Female parallel port.Part No. 42813 -
- High performance hub with active cable that provides an extended 12m connection between a computer and up to 4 USB 2.0 devices
- Can be used standalone or as part of the Lindy Active Extension System Pro to create bespoke extension systems of up to 60m
- Supports USB 2.0 High Speed bandwidth for speeds of 480Mbps
- Easy to use – connects to the device’s existing USB cable (2m maximum)
- 2 year warranty
The Lindy USB Active Extension Hub Pro is a high performance hub with active cable that allows access to four USB 2.0 peripherals over long distances. With support for data transfer speeds of up to 480Mbps this extension cable is perfect for transferring data volumes quickly and reliably.
This 12m extension hub can be used standalone or as part of the Lindy USB 2.0 Active Extension System Pro. This system is a modular solution that can combine multiple USB Active Extension Pro cables and a USB 2.0 Active Extension Pro hub to distribute USB signals to up to 4 devices at up to 60m.
The 8m and 12m cable and the 8m and 12m hub feature a single active repeater module to boost the USB signal. The 30m cable uses two repeaters. A fully deployed extension system is limited to a maximum of 60m and 4 repeater modules. Any combination of cables and a single hub can be connected providing the 60m / 4 repeater limit is not exceeded. The extension hub must always be the last segment of the extension system.
This hub features industry-proven active technology and locking connectors to ensure full signal integrity in the most demanding environments.
" -
- High performance, active cable that provides an extended 12m connection between a computer and USB 2.0 device
- Can be used standalone or as part of the Lindy Active Extension System Pro to create bespoke extension systems of up to 60m
- Supports USB 2.0 High Speed bandwidth for speeds of 480Mbps
- Easy to use – connects to the device’s existing USB cable (2m maximum)
- 2 year warranty
The Lindy USB Active Extension Cable Pro is a high performance active cable that allows access to USB 2.0 peripherals over long distances. With support for data transfer speeds of up to 480Mbps this extension cable is perfect for transferring data volumes quickly and reliably.
This 12m extension cable can be used standalone or as part of the Lindy USB 2.0 Active Extension System Pro. This system is a modular solution that can combine multiple USB Active Extension Pro cables and a USB 2.0 Active Extension Pro hub to distribute USB signals to up to 4 devices at up to 60m
.
The 8m and 12m cable, and the 8m and 12m hub, feature a single active repeater module to boost the USB signal. The 30m cable uses two repeaters. A fully deployed extension system is limited to a maximum of 60m and 4 repeater modules. Any combination of cables and a single hub can be connected providing the 60m / 4 repeater limit is not exceeded. The extension hub must always be the last segment of the extension system.
This cable features industry-proven active technology and locking connectors to ensure full signal integrity in the most demanding environments.
" -
- High performance hub with active cable that provides an extended 8m connection between a computer and up to 4 USB 2.0 devices
- Can be used standalone or as part of the Lindy Active Extension System Pro to create bespoke extension systems of up to 60m
- Supports USB 2.0 High Speed bandwidth for speeds of 480Mbps
- Easy to use – connects to the device’s existing USB cable (2m maximum)
- 2 year warranty
The Lindy USB Active Extension Hub Pro is a high performance hub with active cable that allows access to four USB 2.0 peripherals over long distances. With support for data transfer speeds of up to 480Mbps this extension hub is perfect for transferring data volumes quickly and reliably.
This 8m extension hub can be used standalone or as part of the Lindy USB 2.0 Active Extension System Pro. This system is a modular solution that can combine multiple USB Active Extension Pro cables and a USB 2.0 Active Extension Pro hub to distribute USB signals to up to 4 devices at up to 60m.
The 8m and 12m cable, and the 8m and 12m hub feature a single active repeater module to boost the USB signal. The 30m cable uses two repeaters. A fully deployed extension system is limited to a maximum of 60m and 4 repeater modules. Any combination of cables and a single hub can be connected providing the 60m / 4 repeater limit is not exceeded. The extension hub must always be the last segment of the extension system.
This cable features industry-proven active technology and locking connectors to ensure full signal integrity in the most demanding environments.
" -
- Easy to install smart card reader compatible with a variety of computer operating systems
- Supports smart card operations for digital signature, authentication security etc.
- Compatible with corporate ISO 7816 smart card applications
- USB 2.0 High Speed data rates up to 480Mbps
- 2 year warranty
The Lindy USB 2.0 Smart Card Reader makes it easy to manage a variety of smart cards from a Windows or Mac computer with a USB Type A interface. It supports relevant industry standards like ISO 7816 or PC/SC 1.0/2.0 and multiple smart card protocols. Possible applications can include e-banking, e-payment, digital signature, authentication security, e-government etc.
The Lindy USB 2.0 Smart Card Reader is powered by the USB Bus and easy to install and use. Simply install the smart card driver from the Lindy website, then connect the reader to the PC and plug in the smart card.
" -
- Compliant with USB 2.0 specification
- Can be used as mirror or extended desktop
- Resumes from hibernation and suspend modes
- Supports up to 6 additional connections
- DisplayLink Chipset
- Easy to install - no need to open the computer case
- Supports resolutions up to 1080p (see full list below)
- Bus powered
- Compatible with Windows 2000/XP/Vista/ 7 (32/64bit) & 8, Mac OS 10.4
- 2 year warranty
Part No. 42744 -
- Supports DVI and VGA Displays
- USB 2.0 Compliant (USB 1.1 not supported)
- Up to 6 adapters can be connected to one PC
- Bus Powered
- Displaylink chipset
- Supports Resolutions up to 2048 x 1152 (32 Bit)
- Supports video playbck up to 1080p
- Requires a minimum 1.2GHz single core processor
- Supports up to 6 USB displays simultaneously
- Hot plug: easily add or remove displays without the need for system reboot
- Windows XP/Vista/7/8 compatible
- 2 year warranty
Part No. 42728 -
- Compliant with USB 2.0 specification
- Easy to install - no need to open the computer case
- Bus Powered - supplied with an 90cm USB power cable (no external power supply required)
- Compact design, easy to carry and store
- Supports 3D and resolutions up to 1080p, for both video playback and high resolution desktop (see below for more information)
- HDCP Compliant
- Supports stereo audio over HDMI
- Can be used as a mirrored or extended desktop
- Compatible with Windows XP/Vista/7 (32/64bit) & 8 and Mac OS 10.4.11, 10.5.5 and 10.6
- 2 year warranty
Note: An HDMI cable is not included, why not choose your required length from our range of HDMI Cables?Part No. 42698 -
- Affordable solution for controlling two PCs using one keyboard and mouse
- Unique built in software allows you to switch mouse and keyboard control between connected computers
- Picture in Picture (PIP) function
- Supports USB equipped PCs
- Compatible with Windows 2000, XP, Vista, 7 & 8 (32 & 64 bit)
- Cable length: 1.5m
- 2 year warranty
Our Dual Screen Desktop Arm is ideal for use with two screen setups.Part No. 42617
