web analytics

    • Saves wear and tear on your expensive ports
    Part No. 70069
      • 5 Pin DIN Female to 6 Pin Mini DIN Male
      • Fully moulded
    Part No. 70029
  • This USB to PS/2 adapter cable allows you to connect a USB combo mouse to your computers PS/2 mouse port. Please note this feature is not supported on all USB mice.

     

    • USB Type A Female to 6 Pin Mini DIN Male
    • Compatible only with USB/PS/2 combo mice
    • Cable length: 15cm
    "
  • Screws, spacers, bolts, nuts and jumpers for PC installation personnel
    Part No. 66050
    • Allows you to internally attach a Premium Gold cable to our VGA Face Plate
    • Post: # 4-40 UNC, 14mm
    • Nut: # 4-40 UNC, 5mm
    • Each pack contains 10 nuts and 10 posts
    Pack of 50 also available
    Part No. 66026
  • Post M3, 6 x 5mm

    $5.11 66021
    • 50 Pack
    Part No. 66021
  • Screw M3 x 4mm

    $1.04 66002
    • 50 Pack
    Part No. 66002
    • Contacts with gold plating 1,27μm.
    • Suitable for crimping rigid and flexible cables
    • With insertion aid for easier installation
    • 10 Pack

     

    Cable bend protection or cable lugs are available in Black or Grey.

     

    "
    • Contacts with gold plating 1,27μm.
    • Suitable for crimping rigid and flexible cables
    • With insertion aid for easier installation
    • 10 Pack

     

    Cable bend protection or cable lugs are available in Black or Grey.

    "
    • 10 pack
    • Crimp Type
    Part No. 62201
    • USB A to A Female connectors
    • Supports USB 1.1 and USB 2.0 devices
    • Allows USB cables to be connected to a face plate
    • USB Type A Female connections front and rear
    • Suitable for use with our range of snap in blocks and wall plates
    • Dimensions: 15mm x 20mm
    • 2 year warranty

     

    The LINDY Modular AV Face Plate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules. Fit this USB A to A Keystone into a Keystone Snap-in Block and place into a face plate along side other Keystone and Snap-in modules.

     

    These modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility.

     

    Please Note: The LINDY Modular AV Face Plate System must be used in conjunction with LINDY Keystone Snap-in Blocks and Face Plates. Place this Keystone into either a Single Keystone Snap-in Blocks or Dual Keystone Snap-in Blocks which come in packs of four. Then use with a Single Gang Face Plate or Double Gang Face Plate.

     

     

     

    "
    • Dual Snap-in block
    • Supplied in a pack of 4
    • Suitable for use with our range of Snap-in Blocks and face plates
    • For use with all standard sized keystones (15mm x 20mm)
    • 2 year warranty

     

    Please Note: LINDY Snap-in Blocks must be used in conjunction with a LINDY Single Gang Face Plates or Double Gang Face Plates as well as LINDY Keystones.

     

     

     

     

     

     

     

    "
    • Single Snap-in block
    • Supplied in a pack of 4
    • Suitable for use with our range of Snap-in Blocks and face plates
    • For use with all standard sized keystones (15mm x 20mm)
    • 2 year warranty

     

    The LINDY Modular AV Face Plate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules. Fit a Keystone Modules of your choice into this Snap-in Block and place it into a face plate along side other Keystone and Snap-in modules.

     

    The range of modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility.

     

    A Dual Snap-in Block is also available.

     

    Please Note: LINDY Snap-in Blocks must be used in conjunction with a LINDY Single Gang Face Plates or Double Gang Face Plates as well as LINDY Keystones.

     

    "
    • Accommodates 6 face plate modules
    • Supplied with 4 x blank face plate modules
    • Flip up cover with identification label
    • Suitable for surface mounting
    • Multiple cable entries
    • Dimensions: 170 x 205 x 55mm (WxDxH)
    • Color: White
    • Warranty: 2 years
    Note: picture shown for illustration only, the shown modules are not included.
    Part No. 60549
    • 3 x Phono snap in bezel
    • Gold plated female connectors
    • Suitable for use with our range of snap in bezels and wall plates
    • 2 year warranty

    Please scroll down for more information about installation
    "
    • 3.5mm Stereo keystone female to female connector
    • Supplied in a pack of 2
    • Suitable for use with our range of snap in bezels and wall plates
    • Dimensions: 15mm x 20mm
    • 2 year warranty

    Please scroll down for more information about installation
    "
    • Snap in blank VGA bezel
    • Quantity: 4 per pack
    • Suitable for use with our range of snap in bezels and wall plates
    • 2 year warranty

     

    Please scroll down for more information about installation

    "
    • Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
    • For cable diameters up to 6mm
    • Great for identification at patch panels
    Part No. 60389
    • Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
    • For cable diameters up to 6mm
    • Great for identification at patch panels
    Part No. 60388
    • RJ-45 Female to RJ-45 Female
    • Meets Cat5e requirements
    • Unshielded
    • Warranty: 2 years
    "
    • This CAT5e In-Line Termination Block allows you to easily join solid core cables and still maintain performance. Save time and money when moving, adding to or repairing your wiring system.
    • IDC punchdown termination block
    • Joins solid core FTP cable
    • Suitable for extending and repairing structured cabling systems
    • Compact shielded construction
    Part No. 60173
  • Technical Specifications:
    • Standard: IEEE 802.11g/b
    • Bus Type: USB 2.0, backwards compatible with USB 1.1
    • Connector: USB Type A Male
    • Frequency Band: 2.4000 - 2.4835GHz (ISM-Band)
    • Modulation: OFDM with BPSK, QPSK, 16QAM, 64QAM (11g) BPSK, QPSK, CCK (11b)
    • Radio Technology: Direct Sequence Spread Spectrum (DSSS), Frequency Hopping Spread Spectrum (FHSS)
    • Data Rate: 54,48,36,24,18,12,11, 9, 6, 5.5 ,2 ,1 Mbps (Auto fallback)
    • Security:
    • 64/128/152 Bit WEP
    • WPA (TKIP with IEEE802.1x) and AES
    • LEDs: Link, Activity
    • Sensitivity:
    • -72dBm @ 54Mbps
    • -85dBm @ 11Mbps
    • -93dBm @ 1Mbps
    • Transmit Power: 16dBm
    • Power Consumption: TX: 340mA, RX: 150mA
    • Compatible with Windows 98SE/ME/2000/XP
    • Dimensions: 270 x 870 x 90mm (WxDxH)
    • Antenna: Internal integrated antenna
    Part No. 52031
    • Bus Type: ExpressCard/34
    • Speed: Up to 480Mbps
    • Connectors: 2 x Type A USB Female
    • Ideal for connecting extra USB peripherals such as printers, scanners, drive housings etc., to your notebook
    • Built-in power jack for optional adapter for use when the connected device require power from the USB port
    • For use with computers which feature ExpressCard expansion slots
    • Compatible with Windows 2000/XP/Vista/Windows 7/Server 2003, 2008 and Mac OS 8.6
    • 2 Year warranty
    Part No. 51505
  • ExpressCard card, 1 Port. Use CardBus/PCMCIA cards in the ExpressCard slot. This ExpressCard/34 adapter allows you to connect 32Bit CardBus cards (USB 2.0, FireWire, GigaLan, eSATA, Wireless .) to a notebook with ExpressCard/34 or ExpressCard/54 slot. Note: The ExpressCard/34 adapter must be inserted together with the CardBus card when booting up the computer! No hot-pluggable support
    Part No. 51355
    • Bus Type: 32 Bit PCI
    • Voltage: 3.3V (No 5V support)
    • Speed: Up to 2.7MBps
    • I/O Address: LPT 1-6
    • IRQ Selection: Plug & Play
    • Card Connector: 25 Way D Female
    • Software Compatibility: DOS, Windows 98SE/ME/2000/NT/XP/Server 2003, 2008/Vista/7, Linux
    • 2 year warranty
    Part No. 51305
    • This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.
      • Bus Type: 8/16 Bit ISA
      • Speed: Up to 921Kbit/sec
      • I/O Address: COM 1-12
      • IRQ Selection: 3,4,5,7,9,10,11,12,15
      • IRQ Sharing: Yes
      • Card Connector: 37 Way D Female
      • Adaptor Cable: 4 x 25 Way D Male
      • Software Compatibility: DOS, Windows 3.1x/95/98/ME/NT/2000/XP, Linux
    Part No. 51301
  • PCI Parallel Card

    $13.50 51286
      This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.
    • Bus Type: 32 Bit PCI
    • Speed: Up to 2.7MByte/sec
    • I/O Address: LPT 1-6
    • IRQ Selection: "Plug & Play"
    • Card Connector: 25 Way D Female
    • Separate Back Plate: 25 Way D Female
    • Parallel port can be configured as ECP (Enhanced Capabilities Port) or EPP (Enhanced Parallel Port)
    • Software Compatibility: DOS, Windows 95/98/ME/NT/2000/XP, Linux
    • 3 Year Warranty
    Part No. 51286
    • This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.
      • Bus Type: 32 Bit PCI
      • Speed: Up to 2.7MByte/sec
      • I/O Address: LPT 1-6
      • IRQ Selection: "Plug & Play"
      • Card Connector: 25 Way D Female
      • Parallel port can be configured as SPP, BPP, ECP or EPP
      • Software Compatibility: DOS, Windows 95/98/ME/NT/2000/XP/Vista, Linux
    Part No. 51285
  • This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.
    • Bus Type: 32 Bit PCI
    • Software Compatibility: DOS, Windows 98SE/ME/NT/2000/XP/Vista, Linux
    • 3 Year Warranty
    <div ">Serial Port:
    <ul ">
    • Speed: Up to 921Kbps
    • I/O Address: "Plug & Play"
    • IRQ Selection: "Plug & Play"
    • Card Connector: 9 Way D Male
    • Separate Back Plate: 9 Way D Male
    <div ">Parallel Port:<ul ">
    • Speed: Up to 2.7MBps
    • I/O Address: "Plug & Play"
    • IRQ Selection: "Plug & Play"
    • Card Connector: 25 Way D Female
    • Separate Back Plate: 25 Way D Female
    • Parallel port can be configured as ECP (Enhanced Capabilities Port), EPP (Enhanced Parallel Port), BPP (Bi-directional Parallel Port) or SPP (Standard Parallel Port)
    Part No. 51281
    • This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.
      • Bus Type: 32 Bit PCI
      • Software Compatibility: DOS, Windows 95/98/ME/NT/2000/XP, Linux
    Serial Port:
      • Speed: Up to 921Kbit/sec
      • I/O Address: COM 1-8
      • IRQ Selection: 3, 4, 5, 7, 9
      • Card Connector: 2 x 9 Way D Male
    Parallel Port:
      • Speed: Up to 2.7MByte/sec
      • I/O Address: LPT 1-6
      • IRQ Selection: 3, 4, 5, 7, 9
      • Separate Back Plate: 25 Way D Female
      • Parallel port can be configured as ECP (Enhanced Capabilities Port), EPP (Enhanced Parallel Port), BPP (Bi-directional Parallel Port) or SPP (Standard Parallel Port)
    Part No. 51280
    • Bus Type: 32 Bit PCI
    • Speed: Up to 921Kbit/sec
    • FIFO: 128 byte
    • I/O Address: Com 1-8
    • Card Connector: 62 Way D Female
    • Adapter cable: 1 x 62 Way male to 8 x 9Pin D Male (Octopus cable)
    • 3.3V and 5V support
    • Chipset: Oxford OXuPCI958
    • Software Compatibility: Windows 98/NT/2000/XP/Vista/Windows 7, DOS, Linux
    • 3 Year warranty
    Part No. 51275
    • Bus Type: 32 Bit PCI
    • Speed: Up to 920Kbit/sec
    • I/O Address: "Plug & Play"
    • Supports 3.3V and 5V motherboards
    • DC 5V output for DB9 selected by jumper
    • Standard and Low Profile back plates included
    • IRQ Selection: "Plug & Play"
    • External Connector: 1 x 44 Way D Female
    • Adapter Cable: 44 Way D Male to 4 x 9 Way D Male
    • Software Compatibility: DOS, Windows 98SE/ME/NT/2000/XP/Vista/Windows 7/8/Server 2003, 2008
    • Chipset: Oxford semiconductor
    • 2 Year Warranty
    Part No. 51274
    • This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.
    • Bus Type: 32 Bit PCI
    • Voltage: 3.3V (No 5V support)
    • Speed: Up to 2.7MByte/sec
    • I/O Address: LPT 1-6
    • IRQ Selection: "Plug & Play"
    • Card Connector: 25 Way D Female
    • Software Compatibility: DOS, Windows 98SE/ME/2000/NT/XP/Vista, Linux
    Part No. 51265
  • This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.
    • Bus Type: 32 Bit PCI
    • Speed: Up to 921Kbit/sec
    • I/O Address: "Plug & Play"
    • IRQ Selection: "Plug & Play"
    • Card Connector: 44 Way D Female
    • Adapter Cable: 44 Way D Male to 2 x 9 Way D Male
    • Software Compatability: DOS, Windows 3.1x/95/98/ME/NT/2000/XP/Vista, Linux
    Part No. 51261
    • Low profile PCIe
    • Speed: Up to 1.5Mbps
    • Built-in 32 byte hardware FIFO
    • SPP/EPP/ECP compatible
    • IEEE 1284 standard
    • Supports PCIe Base Specification Rev 1.1
    • Supports x1, x2, x8, x16 (lane) PCIe Bus connector keys
    • Card Connector: 25 Way D Female
    • Software Compatibility: Windows 2000/ME/XP/Vista/Windows 7/Server 2003, 2008, Linux Kernel 2.6.x
    • Chipset: Oxford OXPCIe840
    • 2 Year warranty
    Part No. 51246
    • Bus Type: 32 Bit PCI
    • Speed: 10/100/1000Mbps
    • Standard: IEEE 802.3 (10Base-T), 802.3u (100Base-TX), 802.3ab (1000Base-T), 802.3x (Flow control support) & 802.1q (Virtual LAN)
    • BootROM Socket
    • Plug & Play
    • Card Connector: RJ-45 UTP (10/100/1000Base-T)
    • Chipset: Realtek
    • LED indicators: Link/Activity
    • Gigabit connection over CAT5e or higher STP/UTP cable
    • Software Compatibility: Windows 98SE/ME/NT/2000/XP/Server 2003/Vista/7, Netware 5.x, Netware ODI for DOS, Linux, Unix, Mac OS 10.2 & higher
    Part No. 51220
    • 2 x RS422/485 Ports
    • Bus Type: 32 Bit PCI Compliant
    • Compliant with PCI revision 2.2 (3.3V & 5V)
    • Speed: Up to 921Kbit/sec
    • 256Kbyte FIFO buffer
    • Plug & Play
    • Automatic I/O and IRQ set-up
    • ESD protection 15KV support
    • Card Connector: 1 x DB25 Male to 2 x DB9 Male (via an adapter cable)
    • Software Compatibility: Windows 2000/NT/XP/Vista/Windows 7/Server 2003, 2008, Linux, SCO Unix
    • Supplied with standard and low profile back plates
    • 2 Year warranty
    Part No. 51215
    • Speed: Up to 921Kbit/sec
    • Card Connector: 4 x 9 Way D Male (via breakout cable)
    • Supports PCI Express Specification Revision 1.1
    • Built-in 128K byte DMA software FIFO
    • Software Compatability: Windows 2000/XP/Vista/Windows 7/Server 2003, 2008, Linux
    • 2 Year Warranty
    Part No. 51189
    • Software Compatibility: Windows 2000/XP/Vista/Windows 7/Server 2003, 2008, Linux
    • Supports PCI Express Specification Revision 1.1
    Serial Port:
    • Speed: Up to 921Kbps
    • Card Connector: 2 x 9 Way D Male
    Parallel Port:
    • Speed: Up to 15Mbps
    • Separate Back Plate: 25 Way D Female
    • Parallel port can be configured as ECP (Enhanced Capabilities Port), EPP (Enhanced Parallel Port) or SPP (Standard Parallel Port)
    Part No. 51188
    • Supports Type: 32/64 Bit Systems
    • Speed: Up to 1.5Mbps
    • Built-in 32 byte hardware FIFO
    • SPP/EPP/ECP
    • Card Connector: 25 Way D Female
    • Software Compatability: 2000/XP/Server 2003/Vista (32/64 Bit)/7 (32/64 Bit), Linux
    Part No. 51185
  • This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.
    • Bus Type: PCIe (2.5Gbit/sec)
    • Speed: ATA-133
    • Internal Connector: 40 Way EIDE Male
    • 40 Way IDE Ribbon Cable included (supports two drives)
    • Standard and Low Profile PC Back Plates included
    • Supports RAID levels 0, 1 and JBOD
    • Pin header for drive LED connection
    • Software Compatibility: Windows 2000/XP/Vista/Windows 7/Server 2003, 2008
    • 2 Year warranty
    Part No. 51177
    • Bus Type: PCIe (2.5Gbit/sec)
    • Speed: SATA II (3Gbit/sec)
    • Internal Connector: 1 x SATA Female
    • External Connector: 1 x eSATA Female
    • Port Multiplier and Native Command Queuing support
    • Supports RAID levels 0, 1, 0+1, 5 and JBOD
    • Software Compatibility: Windows 2000/XP/Vista/Windows 7/8/Server 2003, 2008 and up to Mac OS v.10.6
    Part No. 51171
Go to Top