-
- 3.5mm Stereo Jack Male to 3.5mm Stereo Jack Male
- Moulded, Gold Plated Connectors
- Cable Color: Black
- 10 year warranty
Part No. 35450 -
- SATA 1.0a and SATA II compatible
- Features latch type, low profile SATA plugs which lock into place when used with compatible latching controller or device ports
- Can also be used with standard non-latching SATA ports
- 10 year warranty
-
- Securely connects a motherboard to an HDD, SSD or optical drive
- Latching connectors ensure a reliable and secure connection to devices
- Supports both latching and standard motherboards and devices
- Compatible with SATA III and backwards compatible with SATA II and I
- 10 year warranty
The Lindy Latching SATA Cable is a high-performance, reliable cable equipped with two locking 7 pin SATA connectors, allowing users to connect motherboards with SATA peripherals such as HDDs, SSDs and optical drives.
Robust latching mechanisms allow this cable to securely connect to motherboards and peripherals which have the compatible latching mechanisms, providing a reliable internal connection. This cable can also be connected to standard motherboards or devices that don’t have a latching mechanism.
With full support for SATA III and backwards compatibility with SATA II and I this cable is designed to work alongside the most modern motherboards and storage devices as well as older peripherals.
" -
This high quality USB extension lead complies fully with the USB 2.0 specification allowing data transfer speeds of up to 480Mbit/sec.- Can be used with either USB 1.1 or USB 2.0 devices
- Ideal for extending the cable length of smaller USB devices such as Memory Sticks, WLAN and Bluetooth Dongles, MP3 Players etc.
- USB Type A Male to USB Type A Female
- Fully moulded and shielded
- 10 year warranty
Part No. 31653 -
- Can be used with either USB 1.1 or USB 2.0 devices
- Complies fully with the USB 2.0 specification allowing data transfer speeds of up to 480Mbit/sec
- Stylish transparent cable
- Ideal for use as a replacement USB lead for your printer, scanner etc.
- USB Type A Male to USB Type B Male
- Fully moulded
- Length: 0.2m
- 10 year warranty
Part No. 31703 -
- Full CAT5e specification with moulded boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Gigabit Ethernet ready
- 100% performance tested
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Cables feature a unique snag-less latch protector ensuring latches aren‘t easily damaged or broken
- Foil Twisted-Pair (FTP) - the extra foil shielding protects against Electro Magnetic Interference (EMI) and Radio Frequency Interference (RFI)
- 10 year warranty
Part No. 45870 -
- Full CAT6 specification with moulded snagless boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- 10 year warranty
Part No. 45757 -
-
- Full CAT6 specification with molded boots
-
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
-
- Gigabit Ethernet ready
-
- 100% performance tested
-
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
-
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
-
- Useful for color coding your departments, workgroups, etc.
-
- 10 year warranty
Part No. 44845 -
-
- Full CAT6 specification with moulded boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45785 -
- Full CAT6 specification with moulded snagless boots
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45815 -
- Full CAT6 specification with moulded boots and unique connector latch protection
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45770 -
- Full CAT6 specification with moulded boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45800 -
- Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
- Cat.6A S/FTP PIMF, LSZH
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
Cat.6A S/FTP network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500MHz. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.
Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Available colors: Black, Blue, Grey, Red.
" -
- Full CAT6 specification with moulded boots
- Gigabit ready
- 100% performance tested
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- Crossover cables are generally used for hub to hub connections and are instantly recognisable with their contrasting cable and boot Colors
- 10 year warranty
Part No. 44940 -
- Full CAT6 specification with molded snagless boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Cross Over
- 1000Base-T supported
- Color: gray cable with red connector
Pinout:1 ---- 32 ---- 63 ---- 14 ---- 75 ---- 86 ---- 27 ---- 48 ---- 5Part No. 45100 -
- Gold Plated connectors to prevent oxidization for maximum reliability
- IEEE 1394b compliant
- Fully moulded
- 4 pin connector also known as i.Link or DV connector
- Color: Transparent
- Length: 0.3m
- 10 year warranty
Part No. 30784 -
- Allows you to connect a SATA drive equipped with a slimline SATA power connector to your PC's drive controller and power supply
- Combined data & power cable for use with drives which feature a slimline SATA power connector
- Connectors: Combined 7 Pin SATA Male Data + 6 Pin Slimline SATA Male Power to 7 SATA Male Data + 5.25″ Male Power
- 10 Year warranty
Part No. 33607 -
USB-C Cable, USB 3.1 Type C Male to Type C Male - 10Gbit - 0.5 Meter (1.64ft) -
-
- Full CAT6 specification with moulded snagless boots
-
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
-
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
-
- 100% performance tested
-
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
-
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
-
- 10 year warranty
Part No. 45661 -
-
- Full CAT6 specification with moulded snagless boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- 10 year warranty
Part No. 45758 -
- LSOH cable
- Full CAT6 specification with moulded boots and unique connector latch protection
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Low Smoke Zero Halogen PiMF (pairs in metal foil) Cable
- 15? Gold plated pins
- 27 AWG Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Color: Grey
- 10 year warranty
Part No. 46921 -
- Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
- Cat.6 S/FTP PIMF, LSZH
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
Cat.6 S/FTP network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.
Cat.6 cable for operating frequencies up to 250MHz in shielded version with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6 cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.
Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m, 40m, 50m, 60m, 70m, 80m, 90m, 100m.
Available colors: Black, Blue, Gray, Red.
" -
- Full CAT6 specification with moulded boots
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45786 -
- Full CAT6 specification with moulded snagless boots and unique connector latch protection
- Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
- Standards: ISO/IEC 11801, EN50173, EIA/EIA 568B.2
- Gigabit Ethernet ready
- 100% performance tested
- Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- 10 year warranty
Part No. 45771 -
- Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
- Cat.6A S/FTP PIMF, LSZH
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
Cat.6A S/FTP network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500MHz. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.
Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Available colors: Black, Blue, Grey, Red.
" -
- High-performance video cable for use with VCRs, TVs, DVD players etc.
- Delivers superb clarity, definition and detail
- Connectors: 3 x Phono Male to 3 x Phono Male
- Gold-plated connectors for excellent signal transfer
- 75 Ohm Pure Crystal Oxygen Free Copper (PC-OFC) coaxial conductor
- OFC braid with Aluminium Mylar foil wrap provides improved shielding
- 25 year warranty
Part No. 37529 -
- Fully shielded cable with 24K gold plated contacts
- Stylish chrome plated connector hoods
- DisplayPort 1.2 HD 1600p compatible
- Full support for high definition video, multi-channel digital audio and DPCP
- Supports resolutions up to 2560 x 1600
- Supports 8 channel, uncompressed 24bit audio
- DisplayPort compliance certified
- 24K gold plated connector pins
- Bandwidth:17.28Gbps total
- 10 year warranty
Part No. 41530 -
- 24K gold plated contacts with chrome plated connector hoods, fully shielded cable and additional strain relief
- Ethernet support allows IP devices to connect to the internet via a compatible HD TV
- Supports High Speed resolutions up to 4 x higher than 1080p
- Full support for HEC, ARC and CEC compliant devices
- Deep Color capable - supports over 1 billion Colors; x.v.Color and xvYCC ready
- Very compact connector size - ideal for use with recessed HDMI sockets
- 10 year warranty
Click here to compare the main cables from our HDMI range.Part No. 41400 -
- 24K gold plated contacts with chrome plated connector hoods, fully shielded cable and additional strain relief
- Ethernet support allows IP devices to connect to the internet via a compatible HD TV
- Supports resolutions up to 4 x higher than 1080p
- Full support for HEC, ARC and CEC compliant devices
- Deep Color capable - supports over 1 billion Colors; x.v.Color and xvYCC ready
- Very compact connector size - ideal for use with recessed HDMI sockets
- 10 year warranty
The CROMO® High Speed HDMI to Mini HDMI Cable with Ethernet is a superb, high quality cable, ideal for use with mobile phones, smartphones, digital cameras, camcorders and home cinema installations.
It provides premium quality cable construction at an affordable price and features 24K gold plated contacts for optimum conductive ability and resistance to tarnishing and corrosion.
HDMI ATC (Authorised Test Centre) certified for High Speed Category 2 compliance.
HDMI - The Standard for Connecting HDTV
All Digital
No compression, no conversion, pure digital direct from the source as it was meant to be seen and heard.One Cable
All of your HD video and audio in one cable.Say goodbye to cable clutter.
One HDMI cable can replace up to 8 audio and 5 video cables.
" -
- Fully shielded cable with 24K gold plated contacts
- Stylish chrome plated connector hoods
- DisplayPort 1.2 HD 1600p compatible
- Full support for high definition video, multi-channel digital audio and DPCP
- Supports resolutions up to 2560 x 1600
- Supports 8 channel, uncompressed 24bit audio
- DisplayPort compliance certified
- 24K gold plated connector pins
- Bandwidth: 2.7Gbps per lane (total10.8Gbps)
- 10 year warranty
Part No. 41540 -
- USB 2.0 High Speed compliant
- Backwards compatible with USB 1.1/1.0 computers
- Upgraded 99.99% OFC copper conductors
- Double shielded construction
- Fully moulded
- USB Type A Male to USB Type Micro-B Male
- Length: 0.5m
- 10 year warranty
Part No. 41593 -
- USB 3.0 SuperSpeed compliant
- Full Duplex cable capable of transfer rates up to 5 Gbps
- Upgraded 99.99% OFC copper conductors
- Double shielded construction
- Fully moulded
- USB Type A Male to USB Type Micro-B Male
- Length: 0.5m
- 10 year warranty
Part No. 41617 -
- USB 3.0 SuperSpeed compliant
- Full Duplex cable capable of transfer rates up to 5 Gbps
- Upgraded 99.99% OFC copper conductors
- Double shielded construction
- Fully moulded
- USB Type A Male to USB Type A Male
- Length: 0.5m
- 10 year warranty
Part No. 41600 -
- Full CAT6 specification with moulded boots
- Gigabit ready
- 100% performance tested
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- Crossover cables are generally used for hub to hub connections and are instantly recognisable with their contrasting cable and boot Colors
- 10 year warranty
Part No. 44941 -
A high quality guitar cable that's also suitable for use with keyboards and other electric instruments. Constructed from professional grade 6mm cable with an Oxygen Free Copper conductor and flexible steel spring cable relief, it's completed with heavy duty metal jack plugs with gold plated inner conductor tips. This short length is ideal for use as a patch cable between rack equipment or effects pedals.Part No. 6010 -
- Quality, high performance cable from one of the world's leading brands
- Represents excellent value for money
- Triple shielded cable construction for optimum RF and EMI protection
- Solid core construction
- 1080p over HDMI ready
- Supports resolutions up to 1080p,
- ARC and CEC compatible
- Deep Color capable, x.v.Color and xvYCC ready
- 10 year warranty
Click here to compare the main cables from our HDMI range.Part No. 41370 -
-
- Supports high-bandwidth, uncompressed digital video, multi-channel digital audio and control functions
-
- Compatible with HDTV and HDCP (High-Bandwidth Digital Content Protection) - the content scrambling standard for modern, advanced digital video displays and DVD players
-
- Connectors: HDMI Male/Male, Type A
-
- 10 year warranty
Note:- Some projectors have recessed HDMI sockets. The dimensions of the recess need to be large enough to accommodate the HDMI connector used on this cable. The connector dimensions are 23 x 36 x 14mm (WxDxH).
Part No. 41140 -
-
- For use with computers, digital displays, DVD players, projectors, LCD screens and Plasma TVs
- Supports high-bandwidth, uncompressed digital video
- Compatible with HDTV - the content scrambling standard for modern, advanced digital video displays and DVD players
- Connectors: HDMI Type A Male to DVI-D Single Link Male
- 10 year warranty
Part No. 41100 -
- HDMI Type A to HDMI Type D (Micro HDMI)
- HDMI 1.4 compliant, supporting Ultra HD up to 4K 2160p30 and 4K 3D
- Supports HDTV resolutions up to 1080p and DVI-D resolutions up to 1920 x 1200
- Gold plated connectors for excellent signal transfer and resistance to tarnishing and corrosion
- 10 year warranty
- Lengths available: 0.5m, 2m and 3m
" -
- HDMI 1.2 and HDMI 1.3b CAT 2 HD 1080p compatible+
- Supports HDTV resolutions up to 1080p and DVI-D resolutions up to 1920 x 1200
- For use with the latest generation digital camcorders, displays and other devices which feature Mini HDMI connectors
- Gold plated contacts and connectors for optimum signal transfer and resistance to tarnishing and corrosion
- Supports high-bandwidth, uncompressed digital video and digital audio
- Fully HDMI compliant and certified
- HDCP compatible
- Connectors: Mini HDMI Type C Male to Mini HDMI Type C Male
- 10 year warranty
Part No. 41135 -
Our Premium Gold HDMI cable features advanced design and construction for the highest quality and maximum reliability.The triple shielded, low attenuation cable provides superb clarity, definition and detail, even over longer distances, whilst the 24K gold plated connectors allow for excellent, consistent signal transfer.It's the perfect choice for home cinema and professional display installations.Part No. 37400 -
- ATC (Authorised Test center) certified for high speed
- Shielded cable construction for optimum RF and EMI protection
- 24K gold plated contacts
- Supports resolutions up to 1080p and higher, multi channel audio
- 3D over HDMI ready
- Deep Color capable - supports over 1 billion Colors; x.v.Color and xvYCC ready
- Low profile design, ideal for recessed connectors
- Stranded core construction
- 10 year warranty
Click here to compare the main cables from our HDMI range.Part No. 41110 -
- CAT 2 HD 1080p compatible
- Supports HDTV resolutions up to 1080p and DVI-D resolutions up to 1920 x 1200
- 3D over HDMI ready
- Allows the latest generation digital camcorders and other devices with Mini HDMI connectors to be connected to standard HDMI equipped displays and projectors
- Gold plated connectors for excellent signal transfer and resistance to tarnishing and corrosion
- Fully HDMI compliant and certified
- 10 year warranty
- Lengths available: 0.5m - 3m
" -
- Internal data and power extension cable
- Connectors: Combined 7 Pin SATA Male Data + 6 Pin Slimline SATA Male Power to 7 SATA Female Data + 6 Pin Slimline SATA Female Power
- 10 Year warranty
Part No. 33650 -
Data- and power supply cable for USB peripherals! This cable provides power to a bus-powered USB peripheral with an amperage of up to 1A (e.g. disk drive enclosure or USB 2.0 hubs). A USB type A connection provides 500 mA and a data connection; the second USB Type A connection supplies an additional 500 mA when needed.Part No. 31779 -
- Can be used with either USB 1.1 or USB 2.0 devices
- Complies fully with the USB 2.0 specification allowing data transfer speeds of up to 480Mbit/sec
- Ideal for extending the cable length of smaller USB devices such as Memory Sticks, WLAN and Bluetooth Dongles, MP3 Players etc.
- USB Type A Male to USB Type A Female
- Fully moulded and shielded
- 10 year warranty
Part No. 31851 -
- USB 3.0 SuperSpeed Compliant
- Full Duplex cable capable of transfer rates up to 5Gbps
- Double shielded construction
- Fully moulded
- USB Type A Male to USB Type A Male
- Length: 0.5m
- 10 year warranty
Part No. 31980
The Connectivity Center is a supplier of some of the leading physical cybersecurity technologies and physical data security products. We pride ourselves in quality, value, variety, and versatility. We want to be a one-stop shop for most of your physical cybersecurity needs, and we love to serve our partners in this evolving industry.
ACCOUNT
RESOURCES
INFO
The Connectivity Center is committed to ensuring that its website is accessible to people with disabilities. We strive to have all pages on our website meet W3C Web Content Accessibility Guidelines 2.0, Level AA conformance. Any issues should be reported to [email protected].
Copyright © 2012 – | The Connectivity Center | All Rights Reserved | Powered by LeadWorks
