-
Lan Tester Network Cable tester, Pin Configuration/Wire Map Results, Black -
The Lan Tester Network Cable tester Pin Configuration with Wire Map Results is capable of reading the pin configurations of 10 Base-T Cat5 cables, 10 Base-2 Coax, RJ45/RJ11 modular cables, 356A, TIA-568 A/568B and Token Ring cables by comparing one transmitting end to the corresponding receiving end. It can also test for open circuits, wire shorts and cable continuity. The remote kit can test cables that are on a patch panel or wall plate as well as be able to test cables from a distance.Part No. 30D1-56551 -
Simply45 Cat6 Pass Through RJ45 Crimp Connectors, Solid 23AWG/Stranded 26-24AWG, Green Tint, Jar 100 pieces -
Easily detect wire faults and trace unmarked network cable runs with the MapMaster Mini from Platinum Tools. A set of five wire mapping remotes is included for locating terminated runs. The built-in tone generator with four different tone combinations can be used with a tone probe to detect where a cable is routed. Key Features- Large LCD displays TIA/EIA568A/B wire map sequence and identifies faults
- Continuity tests indentifies shorts, opens, miswires, reversals, and split pairs
- Identifies network ID-Only remotes, set of 5
- Identifies unlabeled runs
- Built-in tone generator with 4 tone cadences
- Single multi-function button operates test functions, tone generation, adn ID-Only remotes location
- Self storing remote
- Auto power off conserves battery
Part No. T-109C -
Rackmount Value Line Shelf, 19 inch rack 12 inch deep, 2U. The Economy 2U 12 inch Component Rack Shelf is a light-duty component rack shelf. This shelf has a 25 pound weight capacity.Part No. 61S1-11102 -
This 100ft Cat6 4-Pair SSTP (double shielded) Outdoor Ethernet Patch Cable is designed for even the harshest industrial environments. This cable's water resistant caps allow the cable to be run though environments with both water and dirt. This patch cable features a 26AWG pure copper stranded wire and is filled with a CMX rated gel. RoHS compliant.Part No. 10X8-722HD -
This 100ft Bootless Plenum Cat5e Gray Ethernet Patch Cable is perfect for short runs in buildings or government installations.The plenum rating means that the cable is jacketed in materials which have low toxicity smoke characteristics and fire retardant properties.The Plenum of a building is the area between floors or above office areas for heating/cooling airflow. This cable meets the strictest requirements for any building codes.Part No. 11X6-121HD -
Rackmount Value Line Shelf, 19 inch Rack 14.75 deep inch, 2U. The Economy 2U 14.75 inch Component Rack Shelf is a light-duty component rack shelf. This shelf has a 25 pound weight capacity.Part No. 61S1-11202 -
This EZ crimp is a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. After you crimp, use a cutter or the specifically made crimp tool 92D5-66800 to trim the end.Part No. 202010J -
Rackmount Vented Component Shelf, 19 inch Rack 12 inch deep, 1U. The 1U 12 inch Vented Component Shelf is one of our heavy duty component rack shelves. This shelf has a 70 pound weight capacity and it will easily support servers, tower computers, monitors, batteries, and UPSs.The 1U 12 inch Vented Component Shelf has the strength you need and the venting pattern will allow for maximum air flow.Part No. 61S1-21201 -
This 100ft Bootless Plenum Cat6 Gray Ethernet Patch Cable is perfect for short runs in buildings or government installations.The plenum rating means that the cable is jacketed in materials which have low toxicity smoke characteristics and fire retardant properties.The Plenum of a building is the area between floors or above office areas for heating/cooling airflow. This cable meets the strictest requirements for any building codes.Part No. 11X8-121HD -
Universal(most brands) RJ45 Crimp Tool for UTP and Internal Ground RJ45 Mod Plugs. -
The LANID is an essential tool for verifying and troubleshooting local area networks. It is designed for network administrators to quickly diagnose problems during LAN installation and repair. With a simple push of a button, the LANID will display the status of network devices, whether it is running a 10BASE-T or 100BASE-T network. Furthermore, the LANID is also equipped with a Portfinder function to quickly identify the corresponding port location on the Switch/Hub. The compact design provides the user with optimum convenience and portability.Part No. 31D3-56655 -
Rackmount Patch Panel Hinged Wall Bracket, 7U, 12.5 (H) x 19 (W) x 12 (D) inches. This 7U Rackmount Patch Panel Hinged Wall Bracket has dimensions of 12.5 (H) x 19 (W) x 12 (D) inches and is the perfect addition to any rackmount set-up.Part No. 68BP-2107U -
Simply45 Cat6a Pass Through RJ45 Crimp Connectors, Solid 23AWG, Red Tint, Hi/Lo Stagger, Clamshell 100 pieces -
This crimp tool is designed to quickly crimp and cut the wires of the EZ-RJ45 Connector in one simple operation. The ratcheted straight action crimping motion ensures a uniform crimp every cycle. This tool features precision cast crimping dies for superior accuracy. The all-steel frame has a rust-resistant black oxide finish. For use with all EZ-RJ45 Cat5e & Cat6 Connectors.Part No. 100004C -
Rackmount Component Shelf, 19 inch Rack 12 inch deep, 1U. The 1U 12 inch Component Rack Shelf is one of our heavy duty component rack shelves. This shelf has a 70 pound weight capacity and it will easily support servers, tower computers, monitors, batteries, and UPSs.Part No. 61S2-11201 -
Bulk Phone Cord, Silver Satin, 28/6 (28 AWG 6 Conductor), Spool, 1000 foot. This bulk reel of phone cable is for connecting a phone or fax machine to a wall jack. Color: Silver.Part No. 8606-1000F -
Platinum Tools ezEX44-RJ45 crimp plugs for Cat6 feature a Hi-Lo stagger to isolate each conductor. Simple to use one piece connectors with a pass through design allow conductors to feed through the front end of the connector and be cut flush when the crimp is completed. Crimp tool [part]100061C[/part] is required for this connector. This product comes in a plastic tub with 100 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.290" (7.36mm) Insulation diameter (conductor) size range: 0.039" - 0.044"(0.99 - 1.12mm)Part No. 202044J -
The LANSeeker Cable Tester is a fast, rugged cable tester and tone generator in one unit. It displays cable test results using LED indicators on the main and remote unit. The LANSeeker Tester is an easy-to-use professional grade tool. When the unit senses a connection between the main and remote unit. the battery-saving auto-on feature initiates test results within 2 seconds. The tester automatically powers off within 5 seconds of the cable being disconnected. LANSeeker tests for shorts, opens, miswires, reversals, and split pairs and can display connection and fault information on a pair-by-pair basis. It also generates audio tones for use with tone tracers on all pairs. Made in the USAPart No. TP500C -
Simply45 ProSeries Cat6a Pass Through RJ45 Crimp Connectors, Red Tint, Hi/Lo Stagger, Cap45™, Jar 100 pieces -
Rackmount Value Line Vented Shelf, 19 inch. This Vented Shelf is part of our Value Line, and is 19 inches long and 14.75 inches deep. This shelf is designed for light-duty components, and has a 25 pound weight capacity.Part No. 61S1-22202 -
Parallel Print Server, 1 Parallel Port, One 10/100 Fast Ethernet RJ45 Port. The 74X5-04112 print server is an ideal network printing solution for small offices, home offices, schools and other businesses that require printer sharing over the same network. This print server is equipped with a 10/100Mbps autosensing Ethernet port and a DB-36-pin male bi-directional Centronic port that connects to parallel printers.Part No. 74X5-04112 -
Simply45 Shielded Cat5e Pass Through RJ45 Crimp Connectors, Solid 24AWG/Stranded 28-26AWG, Jar 50 pieces -
V-Racks allow you to vertically or horizontally mount servers or other rack-mountable devices regardless of depth. Designed to mount on a wall or under a desk, the V-Rack provides users more versatility on where they can place their products while saving them space. Available in 2U, 3U and 4U. includes tabbed style rails, and includes screwsPart No. 61R2-24202 -
This gray bulk 500 foot solid Cat5e Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. This particular cable is a gray UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Our Cat5e Ethernet cable exceeds the EIA/TIA-568-C standard.Part No. 10X6-021TF -
Our bulk 500 foot solid Cat5e Ethernet cable comes in an easy to use pull-box and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. This particular cable is a blue UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Our Cat5e Ethernet cable exceeds the EIA/TIA-568-C standard.Part No. 10X6-061TF -
This white bulk 500 foot solid Cat5e Ethernet cable comes in an easy to use pull box and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. This particular cable is a white UTP (Unshielded Twisted Pair) solid cable. The individual conductors are 24 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. Our Cat5e Ethernet cable exceeds the EIA/TIA-568-C standard.Part No. 10X6-091TF -
Wall Mount Small Form Factor CPU Shelf. The Small-Form-Factor Wall Mount CPU Brackets are designed to get the computer off the floor and the desktop. The brackets make it easy to secure and mount any small-form-factor PC to the wall or side of the desk. The velcro strap secures the PC to the bracket. Everyone needs a CPU bracket to protect their PC. Computers located on the floor are in continual danger of being jostled and kicked, not to mention the difficulty in accessing the drives, ports, and card readers. Desktop computers and PCs that sit on a desk take up valuable work space, look cluttered and unorganized, and run the risk of being damaged by a soda or coffee spill. The Small-Form-Factor Wall Mount Bracket protects the PC and creates a more functional, organized workspace.Part No. 61R2-21001 -
Platinum Tools EZ-RJ45 shielded Cat6/5e crimp plugs feature an internal ground simplify twisted pair terminations by allowing the wires to be inserted through the connector and out the front, to easily verify the proper wiring order. Pulling the connector down over the cable jacket and seating it tightly in the rear of the connector optimizes electrical performance of the termination. Reducing the distance between the wire twists and contacts also improves performance. Terminate with the patented EZ-RJ45 Crimp Tools - crimp and trim in one cycle.Part No. 202020J -
Our 25 foot Cat3 telco trunk cable features two 90 degree Amphenol connectors and 25 twisted pairs. Use these cables to bridge telephone based switch boards and equipment require a Centronics 50 (CN50) type Amphenol connector. 25 twisted pair cables are typically used with 66 type blocks in telephone (distribution and routing) applications.Part No. 11X3-25125 -
Our 25 foot Cat3 telco trunk cable features two 90 degree Amphenol connectors (Male to Female) and 25 twisted pairs. Use these cables to bridge telephone based switch boards and equipment require a Centronics 50 (CN50) type Amphenol connector. 25 twisted pair cables are typically used with 66 type blocks in telephone (distribution and routing) applications.Part No. 11X3-25225 -
Our 25 foot Cat3 telco trunk cable features two 90 degree Amphenol connectors (Female to Female) and 25 twisted pairs. Use these cables to bridge telephone based switch boards and equipment require a Centronics 50 (CN50) type Amphenol connector. 25 twisted pair cables are typically used with 66 type blocks in telephone (distribution and routing) applications.Part No. 11X3-25425 -
Platinum Tools PRO Universal Crimp Tool -
Rackmount Vented Eco Shelf, 19 inch Rack 14 inch deep, 2U. The 2U 14 inch Vented Component Shelf is one of our medium duty component rack shelves. This shelf has a 50 pound weight capacity and it will easily support LCD monitors, switches, and other non-rackmountable components.The 2U 14 inch Vented Component Shelf has 4 mounting holes per shelf and rounded corners.Part No. 61S1-21202 -
16 Port 10/100 Fast Ethernet Switch, Black. The 71X5-00316 switch provides an ideal solution for small businesses that demand a reliable network switch that provides a high bandwidth interface between file servers and workgroups, departments and offices.Part No. 71X5-00316 -
Universal(most brands) Crimp Tool for Shielded External Ground Standard RJ45 Modular Plugs -
Platinum Tools EZ-RJ45 shielded Cat6/5e crimp plugs feature an external ground simplify twisted pair terminations by allowing the wires to be inserted through the connector and out the front, to easily verify the proper wiring order. Pulling the connector down over the cable jacket and seating it tightly in the rear of the connector optimizes electrical performance of the termination. Reducing the distance between the wire twists and contacts also improves performance. Terminate with the patented EZ-RJ45 Crimp Tools - crimp and trim in one cycle.Part No. 202022J -
Platinum Tools ezEX48-RJ45 crimp plugs for Cat6a feature a Hi-Lo stagger to isolate each conductor. Simple to use one piece connectors with a pass through design allow conductors to feed through the front end of the connector and be cut flush when the crimp is completed. Crimp tool [part]100061C[/part] is required for this connector. This product comes in a plastic tub with 100 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.290" (7.36mm) Insulation diameter (conductor) size range: 0.43"-0.048" (1.09 - 1.22 mm)Part No. 202048J -
- Twisted Pair Patch Cable with RJ45 connectors and Test Report (100% Test)
- Cat.6 S/FTP PIMF, LSZH
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
- 10 year warranty
Cat.6 S/FTP network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.
Cat.6 cable for operating frequencies up to 250MHz in shielded version with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6 cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.
Available lengths: 0.3m, 0.5m, 1m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m, 40m, 50m, 60m, 70m, 80m, 90m, 100m.
Available colors: Black, Blue, Gray, Red.
" -
The EZ-RJPRO Heavy Duty Crimp Tool is designed to make a professional installer's life a little easier. This tool has a built-in wire cutter, which helps ensure correct wire lengths while being assured that every termination will meet FCC specifications. This heavy duty tool is the perfect solution when working with high performance, larger OD cables that are tougher to terminate due to larger wire gauges, thicker, harder insulation on conductors and pair separating splines. For use with all EZ-RJ45 Cat5e & Cat6 connectors.Part No. 100054C -
Platinum Tools EXO-RJ45 Ethernet Crimp ToolPart No. 100061C -
Rackmount 24 Port Shielded Cat6a Patch Panel, Horizontal, 110 Type, 568A & 568B Compatible, 1UPart No. 69BK-56024 -
24 Port 10/100 Fast Ethernet Switch, Black. The 71X5-00224 switch provides an ideal solution for small businesses that demand a reliable network switch that provides a high bandwidth interface between file servers and workgroups, departments and offices.Part No. 71X5-00224 -
This Tone Generator is a very practical tool, which provides a single or dual tone signal, two test leads and a 4-conductor modular cable. It generates a signal from one end and traces the cables from the other by probe, even when cables are in a bundle or hidden in a mess of punch down blocks or wall plates. It is easy to be used to verify cables continuity, pair condition, line polarity and voltage in network cabling systems (Category 5 and Coax) and modular telephone lines. Tone Generator Features: 2-position button for single tone or dual tone signal Toggle switch to control 3 modes of operation 3-color LED indicator display for telephone line polarity, continuity and voltage testing Black and Red Aligator Clips and standard RJ-11 plug to test individual wire or RJ-11 jack Probe Features: Special inductive plastic tip, which prevents accidental shorts when using near high voltage devices Traces and identifies wires or cable in a bundle or group without damaging cable insulation Adjustable volume level for various work environments Compatible with all existing tone generators in the market Power switch to prevent battery drainPart No. 31D3-56713 -
Bulk Phone Cord, Silver Satin, 28/8 (28 AWG 8 Conductor), Spool, 1000 foot. This bulk reel of phone cable can be used for connecting a phone or fax machine to the wall jack. Color: SilverPart No. 8608-1000F -
RJ45 (100Base-TX) / Fiber-SC (100Base-FX) Converter multimode 2km. We provide a complete series of media conversion solutions for flexible network extensions. The ET-9103SC media converter is able to convert network signals between UTP and fiber optic cable based networks. This allows extension of networks over a longer distance in multi-mode via fiber-optic cabling, able to transmit signals up to 2km. Provides a 10/100BaseT/TX (SC) auto-negotiating RJ-45 connector port that supports full duplex and half duplex switch connectivity and MDI/MDI-X Auto Crossover. The Smart Link Fault Pass-through technology enables the switch to shut down data transmission when the link connection has failed. The converters are IEEE802.3 10Base and 802.3u 100BaseTX and 100BaseFX compliant. Use with SC Multi-Mode - 62.5/125um or 50/125um (support up to 2km)Part No. 71F1-101SC -
Crimp Tool for Simply45 Brand Pass Through UTP & STP(Internal Ground) RJ45 Modular Plugs
The Connectivity Center is a supplier of some of the leading physical cybersecurity technologies and physical data security products. We pride ourselves in quality, value, variety, and versatility. We want to be a one-stop shop for most of your physical cybersecurity needs, and we love to serve our partners in this evolving industry.
ACCOUNT
RESOURCES
INFO
The Connectivity Center is committed to ensuring that its website is accessible to people with disabilities. We strive to have all pages on our website meet W3C Web Content Accessibility Guidelines 2.0, Level AA conformance. Any issues should be reported to [email protected].
Copyright © 2012 –    |   The Connectivity Center   |   All Rights Reserved   |   Powered by LeadWorks
