- USB 2.0/OTG Type Micro-B Male to USB 2.0 Type Mini-B Male
- Micro-B is OTG Host connector
- Black cable
- Fully shielded cable with moulded connectors
- 10 year warranty
-
-
This versatile little blocker makes it easy to protect your data. If you need to protect a port with a thumbscrew, chances are we have a solution.
The piece connected to the port works as a thumbscrew whether it be serial, VGA etc. Once the locking piece is connected you can insert a lock or nylon tie through the ending.
Variations of this neat little security adapter can be used with many of our other locking solutions!Part No. 97734 -
- Mouse holder for receiving the computer mouse
- Including a piece of double-sided tape on the mouse holder - e.g. to attach to the monitor, desk or wall
Part No. 40164 -
Blocks HDMI CEC signals when there is an incompatibility
Use this adapter when you have problems with incompatibilities between IR remote controls; such problems tend to occur now and then in installations with HDMI splitters and -switches.
The adapter does not pass on the CEC signal further. In principle, you only need to use this adapter upstream of the incompatible devices. However, several adapters installed upstream of a number of devices can be used.
- Short adapter HDMI Type A 19 Pole
- 10 year warranty
" -
- USB 2.0/OTG Type Micro-B Male to USB 2.0 Type Mini-B Male
- Micro-B is OTG Host connector
- Black cable
- Fully shielded cable with moulded connectors
- 10 year warranty
-
- Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
- For cable diameters up to 6mm
- Great for identification at patch panels
Part No. 60389 -
- Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
- For cable diameters up to 6mm
- Great for identification at patch panels
Part No. 60388 -
- Helps keep your desk tidy and your computer mouse out of harms way when not in use
- Comes complete with large self-stick pad for permanent fixing to any adjacent surface (e.g. CPU, monitor, wall, etc.)
Part No. 40171 -
- 1 x IEC Plug (1.5m) to 2 x IEC Sockets (0.5m)
- Fully moulded
- Approved to BS 1363/A
- Length: 2m
- Color: Black
- 10 year warranty
Part No. 30037 -
- Regulated 12V output voltage with several adapters for world-wide connections
- Switching power supply for world-wide employment
- Cable length: approx. 1.4m
- 2 year warranty
- Contains 4 exchangeable power supply plugs for Europe, Great Britain, North America and Asia
- Supports input voltages within the range of 100V to 240V
- Great Britain
- Europe
- Hong Kong
- Singapore
- USA
- Canada
- Taiwan
- Japan
- China
- Australia
- New Zealand
Part No. 73805 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidisation for maximum reliability
- Transparent cable
- Fully moulded
- Lengths available: 0.3m - 20m
- 10 year warranty
-
- USB 2.0/OTG Type Micro-B Male to USB 2.0 Type Mini-B Male
- Micro-B is OTG Host connector
- Black cable
- Fully shielded cable with moulded connectors
- 10 year warranty
-
- Connectors: DVI-I (Analogue) Female to VGA 15 Way HD Male
- 10 Year Warranty
- Length: 0.2m
Please note: The DVI-I Female connector used in this adapter cable mates to the analogue pins incorporated in the DVI-I interface to send the analogue VGA signals to your monitor. It does not convert VGA analogue signals to DVI digital!" -
- Allows you to internally attach a Premium Gold cable to our VGA Face Plate
- Post: # 4-40 UNC, 14mm
- Nut: # 4-40 UNC, 5mm
- Each pack contains 10 nuts and 10 posts
Pack of 50 also availablePart No. 66026 -
- Converts an HDMI input into a DisplayPort signal
- Supports resolutions up to 3840x2160@30Hz
- Supports 7.1 channel surround audio
- Compact dimensions for easy installation and use
- 2 year warranty
Â
The Lindy HDMI to DisplayPort Converter is ideal for connecting an HDMI equipped source such as a PC, laptop or Blu-ray player to a DisplayPort monitor or projector. It supports video resolutions up to Ultra HD 4K as well as 7.1 channel surround audio.
Â
This converter can also be used to add a secondary monitor for extended or mirrored desktop modes to increase productivity and screen real estate. It is also ideally suited for travelling due to its compact, lightweight form factor and convenient plug & play installation.
" -
- Speed: Up to 921Kbit/sec
- Card Connector: 4 x 9 Way D Male (via breakout cable)
- Supports PCI Express Specification Revision 1.1
- Built-in 128K byte DMA software FIFO
- Software Compatability: Windows 2000/XP/Vista/Windows 7/Server 2003, 2008, Linux
- 2 Year Warranty
Part No. 51189 -
- Quality, high performance cable from one of the world's leading brands
- Represents excellent value for money
- Triple shielded cable construction for optimum RF and EMI protection
- Solid core construction
- 1080p over HDMI ready
- Supports resolutions up to 1080p,
- ARC and CEC compatible
- Deep Color capable, x.v.Color and xvYCC ready
- 10 year warranty
Click here to compare the main cables from our HDMI range.Part No. 41373 -
- This adapter cable can be used with Notebooks, Camcorders and other devices which feature a 4 segment 3.5mm combined video & stereo audio socket
- Connectors: 1 x 4 segment 3.5mm jack to 3 x RCA/Phono female connectors -
- White (Audio, left)
- Red (Audio, right)
- Yellow (Composite Video)
- Cable length: 25cm
- 10 year warranty
-
This high-quality LINDY USB 2.0 cable is fully-compatible with USB 2.0 specifications and is backwards-compatible with previous standards. It supports all data transfer rates up to 480 MBit/sec.- USB 2.0 cable
- Connector: Micro-A connector to type B connector
- Double-shielded cables with moulded connectors
- Lengths from 0.5m to 3m
Part No. 31950 -
Note: Not for use with Dimage A1, XT, XI, X, X2, F3 & F1IMPORTANT: Camera manufacturers use various different connectors depending on make and model. Before ordering this cable, please ensure that the female connector on your camera corresponds to the male connector end-view as shown in the picture above.Part No. 31679 -
Our black 6 foot USB 3.0 SuperSpeed extension cables offer the next great leap in data transfer speeds for your devices. These particular USB 3.0 cables feature a Type A Male (Computer/Tablet/Laptop/Hub side) to Type A Female (Device side with Type A Male ended cable). This USB SuperSpeed cable enables the extension of an existing device up to a total of 10 feet without a hub/repeater or up to 60 feet (six cables) with hubs/repeaters. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02106EBK -
- 5 Pin DIN Female to 6 Pin Mini DIN Male
- Fully moulded
Part No. 70129 -
- This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card.
-
- Bus Type: 32 Bit PCI
-
- Speed: Up to 2.7MByte/sec
-
- I/O Address: LPT 1-6
-
- IRQ Selection: "Plug & Play"
-
- Card Connector: 25 Way D Female
-
- Parallel port can be configured as SPP, BPP, ECP or EPP
-
- Software Compatibility: DOS, Windows 95/98/ME/NT/2000/XP/Vista, Linux
Part No. 51285 -
-
- High performance hub with active cable that provides an extended 8m connection between a computer and up to 4 USB 2.0 devices
- Can be used standalone or as part of the Lindy Active Extension System Pro to create bespoke extension systems of up to 60m
- Supports USB 2.0 High Speed bandwidth for speeds of 480Mbps
- Easy to use – connects to the device’s existing USB cable (2m maximum)
- 2 year warranty
The Lindy USB Active Extension Hub Pro is a high performance hub with active cable that allows access to four USB 2.0 peripherals over long distances. With support for data transfer speeds of up to 480Mbps this extension hub is perfect for transferring data volumes quickly and reliably.
This 8m extension hub can be used standalone or as part of the Lindy USB 2.0 Active Extension System Pro. This system is a modular solution that can combine multiple USB Active Extension Pro cables and a USB 2.0 Active Extension Pro hub to distribute USB signals to up to 4 devices at up to 60m.
The 8m and 12m cable, and the 8m and 12m hub feature a single active repeater module to boost the USB signal. The 30m cable uses two repeaters. A fully deployed extension system is limited to a maximum of 60m and 4 repeater modules. Any combination of cables and a single hub can be connected providing the 60m / 4 repeater limit is not exceeded. The extension hub must always be the last segment of the extension system.
This cable features industry-proven active technology and locking connectors to ensure full signal integrity in the most demanding environments.
" -
- Enables a computer, which supports dual video output via its DMS output port, to be connected to two separate DVI-I monitors.
- Connectors: DMS 59 Single Link Male to 2 x DVI-I Female
- Length: 160mm
- 10 Year Warranty
Note: Before purchasing this cable, please ensure that your video card can output via a DMS 59 port. You may need to check your system documentation or contact your computer manufacturer for clarification." -
- Supports Video-Mirroring & Extended desktop modes
- For use with iMac (Intel Core Duo), Macbook and 12-inch PowerBook G4
- Length: 20cm (approx)
- Color: White
- 10 year warranty
Part No. 41003 -
- Connectors: 6.3mm Stereo Male to 2 x RCA/Phono Female
- 24K gold plated connectors resist tarnishing to ensure long term performance and reliability
- 10 year warranty
Part No. 35512 -
- Internal Data and power cable
- SATA 7 Pin + 9 Pin Male to SATA 7 Pin + 15 Pin SATA power connector, 0.3m
- 10 Year warranty
Part No. 33636 -
-
- Connectors: 2 shielded SATA Female connectors to 2 x internal SATA Male connector
-
- Length: 25cm
Please Note: The connectors used on this backplate are standard SATA connectors which have been specially shielded for use with older external SATA drive housings. They are not eSATA connectors.Part No. 33121 -
-
- 9 Way D Male to 9 Way D Female
- Fully moulded
- Also CGA/EGA monitor extension cable
- 10 year warranty
-
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30871 -
- For use with guitars, keyboards and other electric instruments
- Heavy duty metal jack plugs with gold plated inner conductor tips
- Professional grade 6mm cable with Oxygen Free Copper conductor and flexible steel spring cable relief
- 1/4" (6.3mm) Straight Jack to 1/4" (6.3mm) Right Angled Jack
- Color: Red
- Warranty: 10 Years
-
-
- High-performance video cable for use with VCR's, TV's, DVD players etc.
-
- Delivers superb clarity, definition and detail
-
- Connectors: Mini 4 Pin Male to Mini 4 Pin Male
-
- Gold-plated connectors for excellent signal transfer
-
- 75 Ohm Pure Crystal Oxygen Free Copper (PC-OFC) coaxial conductor
-
- 25 year warranty
Part No. 37556 -
