- USB 2.0/OTG Type Micro-B Male to USB 2.0 Type Mini-B Male
- Micro-B is OTG Host connector
- Black cable
- Fully shielded cable with moulded connectors
- 10 year warranty
Use this RJ45 port lock around RJ45 sockets to prevent unwanted connection of connection cables. Also prevents unauthorised access via the network.
The lock secures itself to the RJ45 port and can be removed again with the appropriate key. It locks with the front panel of the RJ45 port inside the housing prevent it from being simply pulled out.
Safety information: For safety reasons, please note that these locks can also be removed without the key with skill and an appropriate tool.
Please note: this key is only compatible with the corresponding color of port blocker.
"Blocks HDMI CEC signals when there is an incompatibility
Use this adapter when you have problems with incompatibilities between IR remote controls; such problems tend to occur now and then in installations with HDMI splitters and -switches.
The adapter does not pass on the CEC signal further. In principle, you only need to use this adapter upstream of the incompatible devices. However, several adapters installed upstream of a number of devices can be used.
"
The Lindy USB Active Extension Hub Pro is a high performance hub with active cable that allows access to four USB 2.0 peripherals over long distances. With support for data transfer speeds of up to 480Mbps this extension hub is perfect for transferring data volumes quickly and reliably.
This 8m extension hub can be used standalone or as part of the Lindy USB 2.0 Active Extension System Pro. This system is a modular solution that can combine multiple USB Active Extension Pro cables and a USB 2.0 Active Extension Pro hub to distribute USB signals to up to 4 devices at up to 60m.
The 8m and 12m cable, and the 8m and 12m hub feature a single active repeater module to boost the USB signal. The 30m cable uses two repeaters. A fully deployed extension system is limited to a maximum of 60m and 4 repeater modules. Any combination of cables and a single hub can be connected providing the 60m / 4 repeater limit is not exceeded. The extension hub must always be the last segment of the extension system.
This cable features industry-proven active technology and locking connectors to ensure full signal integrity in the most demanding environments.
"
This simple device gives system administrators, installers and technicians a physical way of preventing people from interfering with LC Fiber Optic connections. This increases security against the risk of unauthorized tampering.
The LC Security Block is made up of a simple 'block' that attaches to the LC Fiber Optic connector. The connector and block are then inserted into the required port as normal, until the block clicks into place. To remove, plug the key into the block and remove the block from port.
The LINDY USB Power Meter plugs directly into any powered USB port. It allows for easy, convenient monitoring of output voltage and operating current. It quickly tells you if your USB socket is providing power normally and if devices are receiving enough power to operate. A LED display allows you to instantly read the information without affecting the performance of the device.
It is ideal for monitoring the power usage of an external drive or other USB peripherals as well as checking the power demands of your smartphone, tablet etc. It can also be used to check the different power outputs of your computers USB Ports, wall charger, battery pack, or even a USB enabled solar panel. Compatible with Quick Charge technology it can easily read any voltage up to 24 volts or measure any current up to 6 amps.
Depending on the orientation of your USB Ports combining the USB Power Meter with one of our Passive Type A Male to Female USB Extension Cables or 90 Degree Male to Female L-Adapters, will allow for easier positioning and viewing of the LCD display.
Please note - USB sockets will only output as much power as is demanded by the device you are charging, the USB Power Meter will show the voltage and amperage being delivered from the USB port. It will not show the maximum possible power output from the USB socket.
The USB 2.0 Audio Adapter is designed to take your standard USB 2.0 port and convert it to a headphone jack, speaker jack or mic jack so you can listen to music, play games, watch movies or video chat. It offers Virtual 7.1 surround sound, which is activated with the supplied software (Windows XP, Windows Vista and Windows 7 only). It has two 3.5-millimeter jack sockets that can be used for headphones, speakers and microphones and is equipped with a handy console with volume and mute buttons so you can adjust the sound from the module. Use this USB audio adapter on Mac or Windows.
The Lindy USB Active Extension Hub Pro is a high performance hub with active cable that allows access to four USB 2.0 peripherals over long distances. With support for data transfer speeds of up to 480Mbps this extension cable is perfect for transferring data volumes quickly and reliably.
This 12m extension hub can be used standalone or as part of the Lindy USB 2.0 Active Extension System Pro. This system is a modular solution that can combine multiple USB Active Extension Pro cables and a USB 2.0 Active Extension Pro hub to distribute USB signals to up to 4 devices at up to 60m.
The 8m and 12m cable and the 8m and 12m hub feature a single active repeater module to boost the USB signal. The 30m cable uses two repeaters. A fully deployed extension system is limited to a maximum of 60m and 4 repeater modules. Any combination of cables and a single hub can be connected providing the 60m / 4 repeater limit is not exceeded. The extension hub must always be the last segment of the extension system.
This hub features industry-proven active technology and locking connectors to ensure full signal integrity in the most demanding environments.
"
The Lindy USB Active Extension Cable Pro is a high performance active cable that allows access to USB 2.0 peripherals over long distances. With support for data transfer speeds of up to 480Mbps this extension cable is perfect for transferring data volumes quickly and reliably.
This 12m extension cable can be used standalone or as part of the Lindy USB 2.0 Active Extension System Pro. This system is a modular solution that can combine multiple USB Active Extension Pro cables and a USB 2.0 Active Extension Pro hub to distribute USB signals to up to 4 devices at up to 60m
.
The 8m and 12m cable, and the 8m and 12m hub, feature a single active repeater module to boost the USB signal. The 30m cable uses two repeaters. A fully deployed extension system is limited to a maximum of 60m and 4 repeater modules. Any combination of cables and a single hub can be connected providing the 60m / 4 repeater limit is not exceeded. The extension hub must always be the last segment of the extension system.
This cable features industry-proven active technology and locking connectors to ensure full signal integrity in the most demanding environments.
"
The Lindy USB 2.0 Smart Card Reader makes it easy to manage a variety of smart cards from a Windows or Mac computer with a USB Type A interface. It supports relevant industry standards like ISO 7816 or PC/SC 1.0/2.0 and multiple smart card protocols. Possible applications can include e-banking, e-payment, digital signature, authentication security, e-government etc.
The Lindy USB 2.0 Smart Card Reader is powered by the USB Bus and easy to install and use. Simply install the smart card driver from the Lindy website, then connect the reader to the PC and plug in the smart card.
"
This high quality USB cable has been designed to provide optimum performance when connected to USB 3.0 equipped PCs and peripherals. Fully compliant with the USB 3.0 specification, the cable supports data transfer speeds of up to 5Gbps, and benefits from double shielded construction and fully moulded connector hoods for maximum strength and total reliability. The cable is also fully compatible with the USB 3.1 Gen 1 specification.
The LINDY Type A to Micro-B high quality USB cable complies fully with the USB 2.0 specification allowing data transfer speeds of up to 480Mbit/sec.
The LINDY Type A to Type B high quality USB cable complies fully with the USB 2.0 specification allowing data transfer speeds of up to 480Mbit/sec.
The LINDY Type A to Type B high quality USB cable complies fully with the USB 2.0 specification allowing data transfer speeds of up to 480Mbit/sec.
The Lindy DisplayPort to DVI Cable is ideal for connecting a DisplayPort equipped source such as a PC or laptop to an DVI display. It supports high definition video resolutions up to 1920x1200@60Hz.
This cable can also be used to add another display to extend the available desktop workspace and increase productivity, great for use in residential or workplace office setups.
"
The Lindy DisplayPort to DVI Cable is ideal for connecting a DisplayPort equipped source such as a PC or laptop to an DVI display. It supports high definition video resolutions up to 1920x1200@60Hz.
This cable can also be used to add another display to extend the available desktop workspace and increase productivity, great for use in residential or workplace office setups.
"
The LINDY CROMO High Speed HDMI Cable with Ethernet is a superb, high quality cable, ideal for use with Sky HD, PS3, Blu-Ray, HDTV and home cinema installations. It provides premium quality cable construction at an affordable price and features 24K gold plated contacts for optimum conductive ability and resistance to tarnishing and corrosion.
HDMI ATC (Authorised Test center) certified for High Speed Category 2 compliance.
Just one of our huge range of DVI cables and DVI leads. For connecting DVI devices at distances of over 10m, use our Super Long Distance DVI Cables.
A guide to DVI is also available.
The Lindy HDMI Coupler is a compact solution for connecting two short HDMI cables together for extended distances.
Please note: When using this coupler, we recommend the total combined cable distance does not exceed 10m (e.g. 5 in, 5 out).
"
This splitter cable allows two monitors to be connected to a computer's single VGA port. It's a passive cable which simply splits a single VGA signal into two without any amplification or signal regeneration, making it an ideal, cost effective solution for shorter installations.
"
The Lindy HDMI 90° downward angled adapter is a compact solution for connecting HDMI cables to HDMI displays or devices with recessed ports, or within limited space where cable connector sizing may affect installation. This adapter allows for a 90° connection in a downward direction if ports are situated on the back of the display or PC.
This is an ideal tool within wall mounted digital signage installations, gaming setups or educational spaces, with no lasting impact on a connected cables strain relief or lifespan. In installations where the cable connection is frequently disconnected and reconnected (e.g. in the area of hardware testing), the adapter can be used to extend the lifespan of the actual ports on the devices.
Please note: it is common for desktop PCs to have HDMI ports function in the opposite configuration. If this is applicable, please check whether this or the opposing adapter (41086) is required.
"
Please note: Some projectors have recessed HDMI sockets.
You should make sure they can accommodate the connector used on this cable.
The new HDMI High Speed specification offers benefits over the previous version:
HDMI Ethernet Channel (HEC)
The High Speed HDMI HEC Cable specification has an additional data channel that enables high speed bidirectional communication.
Connected devices that include this feature will be able to send and receive data via 100mb/sec ethernet, making them instantly ready for any IP based application.
It will also allow internet enabled HDMI devices to share their internet connection with other HDMI devices without the need for a separate ethernet cable.
This new feature will also provide the connection platform to allow HDMI enabled devices to share content between devices.
Audio Return Channel (ARC)
The new specification will add an Audio Return Channel that will reduce the number of cables required to deliver audio upstream for processing and playback.
In cases where HDTV's are directly receiving audio and video content, this new Audio Return Channel allows the HDTV to send the audio stream to the A/V receiver over the HDMI cable, eliminating the need for an extra cable.
3D
The new specification will define common 3D formats and resolutions for HDMI-enabled devices.
The specification will standardise the input/output portion of the home 3D system and will specify up to dual-stream 1080p resolution.
4K
The new specification will enable HDMI devices to support high-definition (HD) resolutions four times beyond the resolution of 1080p.
Support for 4K will allow the HDMI interface to transmit content at the same resolution as many digital theatres.
Formats supported include:
Content Type
Content Type enables, automated picture setting selection with no user intervention.
The Content Type feature enables a display to auto-detect the correct viewing mode to match the Content Type it is receiving from a source device, and to switch modes when a new contect cource is selected.
Content Type supports content profiles for gaming, movie, photograph and text viewing modes.
Audio Formats
HDMI supports multi channel digital audio on a single cable.
It transmits all ATSC HDTV standards and supports 8-channel, 192kHz, uncompressed digital audio and all currently available compressed formats (such as Dolby Digital & DTS), HDMI 1.3 adds additional suopport for new lossless digital audio formats Dolby TrueHD and DTS-HD Master AudioTM with bandwidth to spare to accomodate future enhancements and requirements.
The following formats are supported:
Expanded Support for color Spaces
HDMI technology now supports color spaces designed specifically for digital still cameras.
By supporting sYCC601, Adobe RGB and AdobeYCC601, HDMI-enabled display devices will be capable of reproducing more accurate life-like colors when connected to a digital still camera.
A full range ofHDMI Cables is available.
"
"
"
This DisplayPort to DVI-D adapter converts the graphic signal from the Mac or another device with Thunderbolt- or DP output into a standard DVI-D signal allowing any standard DVI-D monitor to be operated from the device. It supports ATI Eyefinity technology, i.e 3 and more monitors can be connected The adapter is connected via the Thunderbolt- (using adapter, Article No. 41022) or DP connection and connected to the DVI monitor or -projector via a standard DVI cable.
The adapter is Eyefinity compatible and supports 3 and more monitors
Cable tie with Hook and Loop
"
The Lindy 4 Port DisplayPort 1.1 Splitter is a high-end solution for sharing DP signals across 4 displays.
Supporting resolutions up to 2560x1600, this splitter is ideal for use in premium DP distribution setups when providing information to a wider audience with greater coverage, such as digital signage in retail or informative displays in university libraries. Digital audio up to 7.1CH is seamlessly passed through for immersive multi-channel audio to support the video content.
"
Thank you for purchasing from the LINDY Modular Matrix range of products. This range of products is designed to allow you to create a matrix with 8, 16 or 32 input and output ports. The input ports can be a choice of HDMI, DVI or VGA while the output ports can be HDMI, DVI or C6 HDBaseT. Any of the inputs can be combined with any of the outputs to create a UHD 4Kx2K@30Hz display over distances of up to 100m. The modular design provides the ultimate in flexibility for audio and video distribution as a matrix, convertor or an extender in retail product demonstration, training and public display application in schools, pubs etc.
The 8 Port 4K C6 HDBaseT Extender Output Modular Board is designed for use with 38250, 38251, 38252 Chassis systems and 38253, 38254, 38255, 38256 & 38257 range of modular boards.
The C6 HDBaseT Technology supports the transmission of high definition video (resolutions up to 4K UHD and 1920×1200@60Hz, including 1080p 3D*), multi-channel digital audio and control via IR, RS-232 or Web GUI/Telnet IP from eight high definition sources to eight HDBaseT outputs over a single CAT5e (up to 80m) or CAT6/7 cable (up to 100m) for each output.
It supports high resolution digital audio formats such as LPCM 7.1 CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio as well as 3D content that can be displayed when connecting a 3DTV and 3D source. Power over Ethernet (PoE) support means that compatible receivers do not need their own separate power supplies, allowing for greater flexibility in installations and the LAN serving function allows devices such as Smart TVs to be connected to the network/internet.
This flexible feature rich product has been designed to be used in a number of different applications, such as:
Thank you for purchasing from the LINDY Modular Matrix range of products. This range of products is designed to allow you to create a matrix with 8, 16 or 32 input and output ports. The input ports can be a choice of HDMI, DVI or VGA while the output ports can be HDMI, DVI or C6 HDBaseT. Any of the inputs can be combined with any of the outputs to create a UHD 4Kx2K@30Hz display over distances of up to 100m. The modular design provides the ultimate in flexibility for audio and video distribution as a matrix, convertor or an extender in retail product demonstration, training and public display application in schools, pubs etc.
The 8 Port 4K HDMI Input Modular Board is designed for use with 38250, 38251, 38252 Chassis systems and 38253, 38254, 38255, 38256 & 38259 range of modular boards.
Thank you for purchasing from the LINDY Modular Matrix range of products. This range of products is designed to allow you to create a matrix with 8, 16 or 32 input and output ports. The input ports can be a choice of HDMI, DVI or VGA while the output ports can be HDMI, DVI or C6 HDBaseT. Any of the inputs can be combined with any of the outputs to create a UHD 4Kx2K@30Hz display over distances of up to 100m. The modular design provides the ultimate in flexibility for audio and video distribution as a matrix, convertor or an extender in retail product demonstration, training and public display application in schools, pubs etc.
The 8 Port DVI Output Modular Board is designed for use with 38250, 38251, 38252 Chassis systems and 38253, 38254, 38255, 38257 & 38259 range of modular boards.
Thank you for purchasing from the LINDY Modular Matrix range of products. This range of products is designed to allow you to create a matrix with 8, 16 or 32 input and output ports. The input ports can be a choice of HDMI, DVI or VGA while the output ports can be HDMI, DVI or C6 HDBaseT. Any of the inputs can be combined with any of the outputs to create a UHD 4Kx2K@30Hz display over distances of up to 100m. The modular design provides the ultimate in flexibility for audio and video distribution as a matrix, convertor or an extender in retail product demonstration, training and public display application in schools, pubs etc.
The 8 Port DVI Input Modular Board is designed for use with 38250, 38251, 38252 Chassis systems and 38253, 38254, 38256, 38257 & 38259 range of modular boards.
Thank you for purchasing from the LINDY Modular Matrix range of products.
This range of products is designed to allow you to create a matrix with 8, 16 or 32 input and output ports.
The input ports can be a choice of HDMI, DVI or VGA while the output ports can be HDMI, DVI or C6 HDBaseT. Any of the inputs can be combined with any of the outputs to create a UHD 4Kx2K@60Hz 8 bit 4:2:0 display over distances of up to 100m.
The modular design provides the ultimate in flexibility for audio and video distribution as a matrix, convertor or an extender in retail product demonstration, training and public display application in schools, pubs etc.
The 8 Port 4K HDMI Output Modular Board is designed for use with 38250, 38251, 38252 Chassis systems and 38253, 38255, 38256, 38257 & 38259 range of modular boards.
"
Thank you for purchasing from the LINDY Modular Matrix range of products.
This range of products is designed to allow you to create a matrix with 8, 16 or 32 input and output ports.
The input ports can be a choice of HDMI, DVI or VGA while the output ports can be HDMI, DVI or C6 HD-BaseT. Any of the inputs can be combined with any of the outputs to create a UHD 4Kx2K@60Hz 8 bit 4:2:0 display over distances of up to 100m.
The modular design provides the ultimate in flexibility for audio and video distribution as a matrix, convertor or an extender in retail product demonstration, training and public display application in schools, pubs etc.
The 8 Port 4K HDMI Input Modular Board is designed for use with 38250, 38251, 38252 Chassis systems and 38254, 38255, 38256, 38257 & 38259 range of modular boards.
"
NOTE: The chassis does not come with any input or output boards. Pictures are for illustration purposes only.
8x8 & 32x32 versions are also available.
The LINDY 16x16 Modular Matrix is designed to allow you to create a matrix with up to 16 input and 16 output ports. The input ports can be a choice of HDMI, DVI or VGA while the output ports can be HDMI, DVI or C6 HDBaseT.
Any of the inputs can be combined with any of the outputs to create a UHD 4kx2k@60Hz 8 bit 4:2:0 display over distances of up to 100m. The modular design provides the ultimate in flexibility for audio and video distribution as a matrix, convertor or an extender in retail product demonstration, training and public display application in schools, pubs etc.
This product is intended to be used with the following modules -
8 Port 4K HDMI Input Module - 38253
8 Port 4K HDMI Output Module - 38254
8 Port DVI-D Input Module - 38255
8 Port DVI-D Output Module - 38256
8 Port VGA Input Module - 38257
8 Port C6 HDBaseT Output Module - 38259
Package Contents:
Modular Matrix
IR Blaster
IR Extender
Power Cord
Remote control inc battery
User manual
"
* CAT5e Maximum distance 80m, CAT6/7 100m
** IR Functionality is only available using No. 38218 C6 HDMI Receiver Premium and No. 38114 C6 HDMI Faceplate Receiver
*** 1080p 3D can only be supported using the TV EDID setting, with a 3D equipped display connected to Output A
The C6 HDMI 4x4 Matrix Premium with HDBaseT Technology supports the transmission of high definition video (resolutions up to 1080p Full HD and 1920×1200@60Hz, including 1080p 3D*), multi-channel digital audio and control via IR, RS-232 or Web GUI/Telnet IP from four high definition sources to four HDBaseT outputs over a single CAT5e (up to 80m) or CAT6/7 cable (up to 100m) for each output. Output A and C have additional mirrored HDMI outputs.
It supports high resolution digital audio formats such as LPCM 7.1 CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio as well as 3D content that can be displayed when connecting a 3DTV and 3D source. Power over Ethernet (PoE) support means that compatible receivers do not need their own separate power supplies, allowing for greater flexibility in installations and the LAN serving function allows devices such as Smart TVs to be connected to the network/internet.
This flexible feature rich product has been designed to be used in a number of different applications, such as:
The Lindy HDMI to VGA converter converts signals from a HDMI equipped source into a VGA signal. It supports resolutions up to 1920x1200@60Hz for VGA displays. This allows the connection of HDMI capable devices, such as PC’s, notebooks and ultrabooks, to an older VGA display or projector.
The converter can also be used to add another display to extend the available desktop workspace. It is also ideally suited for travelling due to its compact, lightweight form factor and convenient plug & play installation.
"
The Connectivity Center is a supplier of some of the leading physical cybersecurity technologies and physical data security products. We pride ourselves in quality, value, variety, and versatility. We want to be a one-stop shop for most of your physical cybersecurity needs, and we love to serve our partners in this evolving industry.
The Connectivity Center is committed to ensuring that its website is accessible to people with disabilities. We strive to have all pages on our website meet W3C Web Content Accessibility Guidelines 2.0, Level AA conformance. Any issues should be reported to [email protected].
Copyright © 2012 –    |   The Connectivity Center   |   All Rights Reserved   |   Powered by LeadWorks